Research on high accuracy diameter measurement system with CCD

Abstract

Non-touch measurement is an important technology in many domains such as the monitoring of tool breakage and tool wear, et al. Based on the method of curve fitting and demanding inflection point, we present a high accuracy non-touch diameter measurement system. The measurement system comprise linear array CCD, CCD driving circuit, power supply, workseat, light source, data acquisition card and so on. The picture element of the linear array CCD is 2048, and the size of every pixel and the spacing of adjacent pixels have the same size of 14μmx14μm. The stabilized voltage supply has a constant voltage output of 3V. The light is generated by a halogen tungsten lamp, which does not represent any risk to the health of the whole system. The data acquisition card converts the analog signal to digital signal with the accuracy of 12 bit. The error of non-uniform of the CCD pixels in sensitivity and the electrical noise error are indicated in detail. The measurement system has a simple structure, high measuring precision, and can be carried out automatically. Experiment proves that the diameter measurement of the system is within the range of Φ0.5~Φ10mm, and the total measuring unstability of the system is within the range of ± 1.4μm.