Porthos – CO2 Storage in Highly-Depleted Gas Fields

W. Schiferli
{"title":"Porthos – CO2 Storage in Highly-Depleted Gas Fields","authors":"W. Schiferli","doi":"10.2118/215562-ms","DOIUrl":null,"url":null,"abstract":"\n In two planned large-scale CCS projects in the Netherlands – Porthos and Aramis – depleted gas fields will be used for CO2 storage. These fields are characterized by low reservoir pressures. For example, the Porthos project is planned to inject into a field with a reservoir pressure below 20 bar. Project design and operational philosophy need to be specifically tailored to the storage reservoir properties in order to avoid excessively low temperatures when injecting into such fields. This paper describes how these challenges were addressed for the Porthos project.\n In most CCS projects, a CO2 mixture is transported in a surface network at high pressure and ambient temperature and injected into an aquifer. At the high reservoir pressure typical of aquifer storage the CO2 stream remains in dense phase or supercritical conditions in the entire system. This dense phase transport strategy is not feasible for the P18 field since the bottomhole pressure (BHP) is around 25 bar at the required injection rates. At this low pressure, CO2 will exist in two-phase conditions which results in very low temperatures of −10 °C. These low temperatures are unacceptable since they may result in hydrate formation in the reservoir and well integrity issues.\n A specific operating philosophy and project design was developed to avoid unacceptably low temperatures. At a reservoir pressure below 50 bar, CO2 is injected in gas phase in the pipeline and wells. Once the reservoir reaches a pressure of 50 bar the pipeline pressure is increased to 85 bar to achieve dense phase conditions. The well is operated in two-phase conditions but due to the higher BHP well temperatures are now acceptable. However, if CO2 is transported at ambient temperature the injection flow range per well is very narrow and the required project injection range cannot be met. This is addressed by using the heat of compression to heat the CO2 stream and insulating the pipeline to achieve elevated arrival temperature. Without these specific choices, safe injection into the P18 field would not have been possible.","PeriodicalId":130107,"journal":{"name":"Day 1 Tue, September 05, 2023","volume":"14 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2023-09-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Day 1 Tue, September 05, 2023","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2118/215562-ms","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

In two planned large-scale CCS projects in the Netherlands – Porthos and Aramis – depleted gas fields will be used for CO2 storage. These fields are characterized by low reservoir pressures. For example, the Porthos project is planned to inject into a field with a reservoir pressure below 20 bar. Project design and operational philosophy need to be specifically tailored to the storage reservoir properties in order to avoid excessively low temperatures when injecting into such fields. This paper describes how these challenges were addressed for the Porthos project. In most CCS projects, a CO2 mixture is transported in a surface network at high pressure and ambient temperature and injected into an aquifer. At the high reservoir pressure typical of aquifer storage the CO2 stream remains in dense phase or supercritical conditions in the entire system. This dense phase transport strategy is not feasible for the P18 field since the bottomhole pressure (BHP) is around 25 bar at the required injection rates. At this low pressure, CO2 will exist in two-phase conditions which results in very low temperatures of −10 °C. These low temperatures are unacceptable since they may result in hydrate formation in the reservoir and well integrity issues. A specific operating philosophy and project design was developed to avoid unacceptably low temperatures. At a reservoir pressure below 50 bar, CO2 is injected in gas phase in the pipeline and wells. Once the reservoir reaches a pressure of 50 bar the pipeline pressure is increased to 85 bar to achieve dense phase conditions. The well is operated in two-phase conditions but due to the higher BHP well temperatures are now acceptable. However, if CO2 is transported at ambient temperature the injection flow range per well is very narrow and the required project injection range cannot be met. This is addressed by using the heat of compression to heat the CO2 stream and insulating the pipeline to achieve elevated arrival temperature. Without these specific choices, safe injection into the P18 field would not have been possible.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Porthos -高度枯竭天然气田中的二氧化碳储存
在荷兰的两个计划中的大型CCS项目——Porthos和Aramis——枯竭的天然气田将被用于二氧化碳储存。这些油田的特点是储层压力低。例如,Porthos项目计划在油藏压力低于20bar的油田进行注入。项目设计和操作理念需要根据储层特性进行专门定制,以避免在注入此类油田时温度过低。本文描述了这些挑战是如何在Porthos项目中解决的。在大多数CCS项目中,二氧化碳混合物在高压和环境温度下通过地面网络输送,然后注入含水层。在含水层典型的高储层压力下,CO2流在整个系统中保持致密相或超临界状态。这种致密相输送策略在P18油田是不可行的,因为在所需的注入速度下,井底压力(BHP)约为25 bar。在这种低压下,CO2将以两相状态存在,从而导致−10°C的极低温度。这种低温是不可接受的,因为它可能导致储层中水合物的形成和井的完整性问题。为了避免不可接受的低温,开发了特定的操作理念和项目设计。当储层压力低于50bar时,将二氧化碳以气相注入管道和井中。一旦储层压力达到50 bar,管道压力就会增加到85 bar,以达到致密相条件。该井在两相条件下运行,但由于BHP较高,现在可以接受井温。然而,如果在环境温度下输送CO2,则每口井的注入流量范围非常窄,无法满足所需的项目注入范围。这是通过使用压缩热来加热二氧化碳流并使管道绝缘以达到更高的到达温度来解决的。如果没有这些特定的选择,P18油田的安全注入是不可能的。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
More than just Rules! Safety as a Universal Language- Transition to Industry Life-Saving Rules Embedding Human Performance in Practice Journey Towards Near Zero Flaring - A Case Study Mechanical Umbilical-Less Installation of Tubing Hangers Porthos – CO2 Storage in Highly-Depleted Gas Fields Safe and Successful Gas Hydrate Plug Remediation in Vega Asset – Norwegian Gas Condensate Subsea Production System
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1