Evaluation of a Field-Wide Post-Steam In-Situ Combustion Performance in a Heavy Oil Reservoir in China

Abstract

We evaluated the performance of a field-wide post-steam in-situ combustion (ISC) project conducted in a complex heavy oil reservoir in China using laboratory one-dimensional combustion experiments, reservoir simulation outputs, and data collected from the field application. The commercial ISC project showed vastly different production performances in different regions of the field and two types of representative well groups were identified. Type I group has a low oil viscosity (<8000 mPa.s) and a high steam-flooded recovery factor (>30%); after ISC treatment, these producers show a high initial water cut, while some experience channeling issues and hence produce a large quantity of flue gas. Type II group has a high oil viscosity (>20000 mPa.s) and a low cyclic steam stimulation (CSS) recovery factor (15-20%); these producers have a high air injection pressure exceeding the fracture pressure. Corresponding remedial methods were designed and applied to these two well groups. Presently, the evaluation methods described in this paper are being applied in the field, and initial results have been acquired.