Pulsed Laser Annealing Effect on Optical and Structural Properties of ZnS/ZnSe Heterostructures

H. Howari
{"title":"Pulsed Laser Annealing Effect on Optical and Structural Properties of ZnS/ZnSe Heterostructures","authors":"H. Howari","doi":"10.21467/jmm.6.1.23-29","DOIUrl":null,"url":null,"abstract":"Studies of pulsed laser annealing (PLA) on semiconductor thin films were performed to examine changes of the optical and structural parameters due to the laser heat. Thin films of ZnS/ZnSe were deposited on quartz substrates at a pressure of 8.2*10-6 mbar using PVD technique. These thin films were annealed at different laser powers using CO2 pulsed laser. Transmission and reflection spectra were recorded before and after the annealing process. A decrease in the transmission and reflection spectra after annealing is observed. The absorption coefficient, refractive index, damping coefficient and dielectric constant were calculated before and after the annealing process. Changes in the optical parameters are found after the annealing process. The energy band gaps of ZnS and ZnSe have been determined. Upon annealing, an increase in the absorption coefficient is observed which is due to an improvement in the granular nanostructure of the ZnS/ZnSe thin films. XRD patterns of the prepared samples were obtained before and after the annealing procedure and revealed an enhancement in the crystallite structure upon annealing.","PeriodicalId":370184,"journal":{"name":"Journal of Modern Materials","volume":"45 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2019-10-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Modern Materials","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.21467/jmm.6.1.23-29","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

Studies of pulsed laser annealing (PLA) on semiconductor thin films were performed to examine changes of the optical and structural parameters due to the laser heat. Thin films of ZnS/ZnSe were deposited on quartz substrates at a pressure of 8.2*10-6 mbar using PVD technique. These thin films were annealed at different laser powers using CO2 pulsed laser. Transmission and reflection spectra were recorded before and after the annealing process. A decrease in the transmission and reflection spectra after annealing is observed. The absorption coefficient, refractive index, damping coefficient and dielectric constant were calculated before and after the annealing process. Changes in the optical parameters are found after the annealing process. The energy band gaps of ZnS and ZnSe have been determined. Upon annealing, an increase in the absorption coefficient is observed which is due to an improvement in the granular nanostructure of the ZnS/ZnSe thin films. XRD patterns of the prepared samples were obtained before and after the annealing procedure and revealed an enhancement in the crystallite structure upon annealing.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
脉冲激光退火对ZnS/ZnSe异质结构光学和结构性能的影响
对半导体薄膜进行了脉冲激光退火(PLA),研究了激光热对薄膜光学和结构参数的影响。利用PVD技术在8.2*10-6 mbar的压力下,在石英衬底上沉积了ZnS/ZnSe薄膜。利用CO2脉冲激光在不同激光功率下对这些薄膜进行退火。记录了退火前后的透射和反射光谱。观察到退火后透射和反射光谱的减小。计算了退火前后的吸收系数、折射率、阻尼系数和介电常数。在退火过程中发现了光学参数的变化。测定了ZnS和ZnSe的能带隙。退火后,由于ZnS/ZnSe薄膜颗粒状纳米结构的改善,吸收系数增加。制备的样品在退火前后的XRD谱图显示,退火后的晶体结构有所增强。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Experimental Investigation on Behaviour of Folded Plate Physicochemical and Performance Assessment of Clay Based Refractory Bricks for Incinerator Application The Influence of Preparation Parameters on Structural and Optical Properties of N-Type Porous Silicon Applying a Set of Orthogonal Basis Functions in Numerical Solution of Hallen's Integral Equation for Dipole Antenna of Perfectly Conducting Material Analytical and Experimental Study on Flexural Behavior of Beam-column Joint with Addition of Polypropylene Fibers
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1