DESIGN OF FUZZY LOGIC CONTROLLER FOR CHARGING SYSTEM WITH TEMPERATURE CONDITION SYSTEM IN EXCAVATOR

Abstract

Batteries have an important role in the development of energy needs. A good battery performance, will support the device it supports. The amount of battery that can be stored is limited, the battery will experience a charge and discharge cycle. One aspect of battery management is how the temperature in the battery is always controlled. This will place the battery always in the ideal temperature so that it can work optimally. The stages in software design consist of designing a fuzzy logic controller that uses Arduino software. To display the results of reading the system, the Serial Monitor is used in the Arduino software. From the data, the response from the control used will be observed. The system is controlled using the Fuzzy Logic Controller method. In this experiment, the input used is the LM35 temperature sensor. This value will affect the speed of the DC motor which in this experiment is regulated through the determination of the PWM value. There are 3 PWM values, namely 100 for slow motor speed, 200 for medium motor speed and 255 for fast motor speed.