Comparative study for Active Noise Cancellation using Adaptive filtering and Standing wave pattern

Abstract

Noise pollution is one of the most fundamental challenges facing our environment, causes health problem, communication inefficiency and degrade the performance of works due to lack of concentration, thus, mitigating this impact becomes an unavoidable requirement of time to protect people's health and the environment. This noise may originate from several sources including industrial machinery, system parts wear out, and adjacent environmental acoustics. To mitigate this noise effect, an Active Noise Cancellation (ANC) headphone is achieved by two effective techniques; Adaptive filtering and Standing wave phenomenon. In this work, an ANC system is designed using both adaptive filtering and standing wave techniques, the former one basically utilizes single-channel feedforward whereas the latter one utilizes both single-channel feedforward and feedback control. LMS adaptive filter algorithm is the basic component of the designed ANC headphone. For simulation, a noise-free signal will be used as the desired audio signal and a gaussian distributed noise as the unwanted noise signal, these are combined to form noise corrupted speech signal. Propose algorithms performance were evaluated based on the ability to mitigate effects of different frequency broad-band noise signals and of different Noise to Signal ratio. Evaluation measures used are; convergence rate and noise reduction in dB. Result reveals ANC headphone using standing wave technique has better performance at mitigating noise frequency below 800Hz, with low SNR than Adaptive filtering. However, at higher frequencies above 1000Hz, ANC headphone using Adaptive filtering has good performance of masking high frequencies up to 22dB.