{"title":"SPRINGBACK COMPANSATION WITH USING TWO DIFFERENT RADIUS IN BENDING U FORM SHAPE SHEET METAL PARTS","authors":"T. T. Abi, A. Yilmaz","doi":"10.33422/4ste.2019.02.17","DOIUrl":null,"url":null,"abstract":"Springback is the major problem in U –shaped part forming. Prediction and compensation of springback at the design stage is very important from industrial perspectives. Achieving the required geometries for companies in the desired accuracy and in a short time increases their competitive direction. The compensation for springback in U-form parts requires a large number of analyzes and workshops. In U-form parts, shaping the vertical walls at the desired angle in one-form operation is impossible due to the spring-back of the sheet metal. For this reason, using 2 form operations, the first form operation is reached to a certain value and the second form operation tries to close the aperture which is more than the desired value in U form. In the project, it is aimed to determine the parameters affecting the formation of U-shaped and 90degree vertical wall by applying 2 shear bending operations to flat sheet metal. For this purpose, 5 different sheet thicknesses (1,2-1,8-2-2,5-3mm), 2 different sheet metal grades (HR340LA, DP600), 4 different radius values (4-8-16-32mm) and 3 different reduction rate (5-10-15%) was used. In order to reduce the time and costs in the design phase, a total of 192 tests were performed and the effect of parameters on the springback was investigated.","PeriodicalId":339076,"journal":{"name":"Proceedings of the 4th International Conference on Modern Approaches in Science, Technology & Engineering","volume":"30 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2019-02-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of the 4th International Conference on Modern Approaches in Science, Technology & Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.33422/4ste.2019.02.17","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
Abstract
Springback is the major problem in U –shaped part forming. Prediction and compensation of springback at the design stage is very important from industrial perspectives. Achieving the required geometries for companies in the desired accuracy and in a short time increases their competitive direction. The compensation for springback in U-form parts requires a large number of analyzes and workshops. In U-form parts, shaping the vertical walls at the desired angle in one-form operation is impossible due to the spring-back of the sheet metal. For this reason, using 2 form operations, the first form operation is reached to a certain value and the second form operation tries to close the aperture which is more than the desired value in U form. In the project, it is aimed to determine the parameters affecting the formation of U-shaped and 90degree vertical wall by applying 2 shear bending operations to flat sheet metal. For this purpose, 5 different sheet thicknesses (1,2-1,8-2-2,5-3mm), 2 different sheet metal grades (HR340LA, DP600), 4 different radius values (4-8-16-32mm) and 3 different reduction rate (5-10-15%) was used. In order to reduce the time and costs in the design phase, a total of 192 tests were performed and the effect of parameters on the springback was investigated.