EXPERIMENTAL STUDY OF RELATIVE DENSITY EFFECT ON BEARING CAPACITY OF SAND REINFORCED WITH GEOGRID

N. Fakher, M. Fakhruldin
{"title":"EXPERIMENTAL STUDY OF RELATIVE DENSITY EFFECT ON BEARING CAPACITY OF SAND REINFORCED WITH GEOGRID","authors":"N. Fakher, M. Fakhruldin","doi":"10.30572/2018/kje/120304","DOIUrl":null,"url":null,"abstract":"Reinforced soil technology is considered one of the most important methods of soil improvement due to its simplicity and speed in implementation and saving cost. In this research a strip footing and geogrid (Tensar SS2) were used to reinforced sandy soil and investigated the effect of relative density on bearing pressure and compressibility. The soil was strengthen with four layers of (geogrid Tensar SS2) and used a five relative densities were (30.7%, 49.7%, 56.5%, 64%, and 75.9%) to include cases of loose, medium and dense sand. The results also showed the effect of relative density on the bearing capacity and the settlement as experimental tests indicated that increasing the relative density from 30.9% to 64% gave an improvement in soil bearing capacity, as well as an effective improvement in carrying capacity when increasing the relative density from 64%. The results showed that the bearing capacity when using relative densities of 49.7%, 56.5%, 64%, 75.9% increased by 1.218, 1.287, 1.512, and 2.1799, respectively, of the bearing capacity of reinforced soils with relative density of 30.7%. As for the effect of relative density on the settlement, it was found that the settlement is generally less in the case of soil with higher relative density.","PeriodicalId":123515,"journal":{"name":"Kufa Journal of Engineering","volume":"2673 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2021-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Kufa Journal of Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.30572/2018/kje/120304","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 3

Abstract

Reinforced soil technology is considered one of the most important methods of soil improvement due to its simplicity and speed in implementation and saving cost. In this research a strip footing and geogrid (Tensar SS2) were used to reinforced sandy soil and investigated the effect of relative density on bearing pressure and compressibility. The soil was strengthen with four layers of (geogrid Tensar SS2) and used a five relative densities were (30.7%, 49.7%, 56.5%, 64%, and 75.9%) to include cases of loose, medium and dense sand. The results also showed the effect of relative density on the bearing capacity and the settlement as experimental tests indicated that increasing the relative density from 30.9% to 64% gave an improvement in soil bearing capacity, as well as an effective improvement in carrying capacity when increasing the relative density from 64%. The results showed that the bearing capacity when using relative densities of 49.7%, 56.5%, 64%, 75.9% increased by 1.218, 1.287, 1.512, and 2.1799, respectively, of the bearing capacity of reinforced soils with relative density of 30.7%. As for the effect of relative density on the settlement, it was found that the settlement is generally less in the case of soil with higher relative density.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
相对密度对土工格栅加筋砂承载力影响的试验研究
加筋土技术因其简单、快速、节约成本而被认为是土壤改良的重要方法之一。采用条形基础加筋土工格栅(Tensar SS2)对砂土进行加筋,研究了相对密度对砂土承载压力和压缩性的影响。采用4层(Tensar SS2)土工格栅加固,采用5种相对密度分别为:30.7%、49.7%、56.5%、64%和75.9%。试验结果表明,当相对密度从30.9%增加到64%时,土的承载力得到改善;当相对密度从64%增加时,土的承载力得到有效改善。结果表明:相对密度为49.7%、56.5%、64%、75.9%时的承载力比相对密度为30.7%时的承载力分别提高1.218、1.287、1.512、2.1799;对于相对密度对沉降的影响,发现相对密度越高,沉降一般越小。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
THE STUDYOF INSULATING PROPERTIES OF REFRACTORY BRICKS PRODUCED USING MELON SEED HUSKSAS POREFORMER BIO-ADSORPTION OF HEAVY METAL ION FROM WATER USING ACTIVATED CARBON EFFECT OF ZIRCONIUM ADDITION ON MICROSTRUCTURE AND PROPERTIES OF PURE TI PRODUCED BY POWDER METALLURGY DEVELOPMENT OF MICROSTRUCTURE, MECHANICAL AND WEAR CHARACTERISTICS OF THE BRASS ALLOY PROCESSED BY ECAP HIGHLY EFFICIENT INVERTER BLOCKS IN QCA TECHNOLOGY
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1