Simulation and realization of printed Vivaldi-type antenna to optimize a bench of characterization of the materials used in GSM and DCS antennas

Lamia Zarral, F. Ndagijimana
{"title":"Simulation and realization of printed Vivaldi-type antenna to optimize a bench of characterization of the materials used in GSM and DCS antennas","authors":"Lamia Zarral, F. Ndagijimana","doi":"10.1109/MMS.2011.6068579","DOIUrl":null,"url":null,"abstract":"In this paper, we present the study of a printed Vivaldi- type antenna, simulated using two software: “LINpar” to ensure the adaptation of the input of the antenna with the coaxial line and “ANSOFT Designer” for the analysis of the adjusted line and the antenna. This tool has helped us to obtain simulation results in the form of S-parameters and allowed us to obtain a gain of about 10dB, a bandwidth from 500 MHz at 6 GHz and an input impedance of 50 Ohms from the reflection coefficient S11. Finally, to validate the simulations, carried out, the realised antenna has been characterized using a network analyzer. The radiation pattern and S parameter values obtained are very satisfactory.","PeriodicalId":176786,"journal":{"name":"2011 11th Mediterranean Microwave Symposium (MMS)","volume":"24 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2011-11-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2011 11th Mediterranean Microwave Symposium (MMS)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/MMS.2011.6068579","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

In this paper, we present the study of a printed Vivaldi- type antenna, simulated using two software: “LINpar” to ensure the adaptation of the input of the antenna with the coaxial line and “ANSOFT Designer” for the analysis of the adjusted line and the antenna. This tool has helped us to obtain simulation results in the form of S-parameters and allowed us to obtain a gain of about 10dB, a bandwidth from 500 MHz at 6 GHz and an input impedance of 50 Ohms from the reflection coefficient S11. Finally, to validate the simulations, carried out, the realised antenna has been characterized using a network analyzer. The radiation pattern and S parameter values obtained are very satisfactory.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
仿真与实现了印刷维瓦尔第型天线,优化了用于GSM和DCS天线的材料表征
本文对一种打印的维瓦尔第型天线进行了研究,并使用两个软件进行了仿真:“LINpar”软件用于保证天线输入与同轴线的适应,“ANSOFT Designer”软件用于分析调整后的线和天线。该工具帮助我们获得了s参数形式的仿真结果,并使我们能够从反射系数S11获得约10dB的增益,500 MHz的6 GHz带宽和50欧姆的输入阻抗。最后,为了验证所进行的仿真,利用网络分析仪对所实现的天线进行了表征。得到的辐射方向图和S参数值令人满意。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Early demonstration of a passive millimeter-wave imaging system using substrate integrated waveguide technology Magnetic loop antenna for wireless capsule endoscopy inside the human body operating at 315 MHz: Near field behavior Proximity coupled microstrip patch antenna design with reduced out of band harmonics device at 2.45 GHz Analysis and design of dual band-notched interdigital hairpin UWB bandpass filter Novel technique for improvement of transmission line matrix method algorithm frequency response
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1