{"title":"The Influence of the Type of Coating on the Cutting Tool Wear During Turning Of 316L Austenitic Stainless Steel","authors":"R. Maruda, Natalia Szczotkarz","doi":"10.2478/amtm-2018-0008","DOIUrl":null,"url":null,"abstract":"Abstract The paper presents the influence of coatings applied with the use of PVD method on cutting tools on the wear of the tool and compares it with an uncoated P25 cemented carbide plate. During the experiment, two types of TiAlN coatings were used, applied in various proportions, as well as TiN coating. During the tests, the average width of the wear band on the flank face in B VBBzone and the width of KBcrater were monitored. Moreover, the scanning analysis of the tool was conducted in order to determine the intensity of adhesive wear. The lowest values of selected tool wear indicators were found out with the use of TiAlN coating applied in eight layers in the proportions 33/67% -TiN/TiAlN. The scanning analysis proved the highest adhesive wear of the uncoated P25 cemented carbide plate, as well as increased abrasive wear of the flank face and the formation of a crater in comparison with coated plates.","PeriodicalId":379471,"journal":{"name":"Archives of Mechanical Technology and Materials","volume":"39 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"4","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Archives of Mechanical Technology and Materials","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2478/amtm-2018-0008","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 4
Abstract
Abstract The paper presents the influence of coatings applied with the use of PVD method on cutting tools on the wear of the tool and compares it with an uncoated P25 cemented carbide plate. During the experiment, two types of TiAlN coatings were used, applied in various proportions, as well as TiN coating. During the tests, the average width of the wear band on the flank face in B VBBzone and the width of KBcrater were monitored. Moreover, the scanning analysis of the tool was conducted in order to determine the intensity of adhesive wear. The lowest values of selected tool wear indicators were found out with the use of TiAlN coating applied in eight layers in the proportions 33/67% -TiN/TiAlN. The scanning analysis proved the highest adhesive wear of the uncoated P25 cemented carbide plate, as well as increased abrasive wear of the flank face and the formation of a crater in comparison with coated plates.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
