Mathematical Modeling of water surface at Unsteady Flow in Al-Msharah River

S. Khassaf, Jaffar S. Maatooq, S. Nasrallah
{"title":"Mathematical Modeling of water surface at Unsteady Flow in Al-Msharah River","authors":"S. Khassaf, Jaffar S. Maatooq, S. Nasrallah","doi":"10.30572/2018/kje/11295","DOIUrl":null,"url":null,"abstract":"\n\n\n\n\n\n\n\n\n\nThis study is concerned with unsteady flow in open channels in boundary conditions that may exist in river or channel system. A software Hydrologic Engineering Center-River Analysis System (HEC-RAS) was used for a case study. The software contains a hydrodynamic model for simulating the unsteady flow in open channels based on a one-dimensional form of the Saint-Venant equations, by formulating a discrete form using the implicit finite difference scheme, then solving using the Newton-Raphson iteration procedure and the modified Gaussian elimination technique. The case study adopted with the help of HEC-RAS application was applied to a reach of Al Msharah River (channel) between AL Msharah Barrage (upstream)and Al Malah Bridge (Downstream), for a length of (49 Km) divided to (52) cross sections. Model runs and the comparison of results with actual field data indicate that the accuracy of the results obtained for(θ=1 and ∆t=5 minute) is quite acceptable, where θ is a weighting parameter and ∆t is the time interval. The paper covers the case of normal depth of flow and observed water stage data within the period ( from January 2006 to July 2006) . The results demonstrate that the area at Al Am'arah city at distance 17.5 Km from upstream(cross section 30)could be subjected to flooding at High Flow, therefore, it is recommended to adjust cross sections to prevent the flooding in this area. At last , Calibration of the hydrodynamic model is achieved in a study reach using the observed data (water stage) along AL Msharah River and show that a good agreement.\n\n\n\n\n\n\n\n\n\n","PeriodicalId":123515,"journal":{"name":"Kufa Journal of Engineering","volume":"22 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2021-06-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Kufa Journal of Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.30572/2018/kje/11295","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

This study is concerned with unsteady flow in open channels in boundary conditions that may exist in river or channel system. A software Hydrologic Engineering Center-River Analysis System (HEC-RAS) was used for a case study. The software contains a hydrodynamic model for simulating the unsteady flow in open channels based on a one-dimensional form of the Saint-Venant equations, by formulating a discrete form using the implicit finite difference scheme, then solving using the Newton-Raphson iteration procedure and the modified Gaussian elimination technique. The case study adopted with the help of HEC-RAS application was applied to a reach of Al Msharah River (channel) between AL Msharah Barrage (upstream)and Al Malah Bridge (Downstream), for a length of (49 Km) divided to (52) cross sections. Model runs and the comparison of results with actual field data indicate that the accuracy of the results obtained for(θ=1 and ∆t=5 minute) is quite acceptable, where θ is a weighting parameter and ∆t is the time interval. The paper covers the case of normal depth of flow and observed water stage data within the period ( from January 2006 to July 2006) . The results demonstrate that the area at Al Am'arah city at distance 17.5 Km from upstream(cross section 30)could be subjected to flooding at High Flow, therefore, it is recommended to adjust cross sections to prevent the flooding in this area. At last , Calibration of the hydrodynamic model is achieved in a study reach using the observed data (water stage) along AL Msharah River and show that a good agreement.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Al-Msharah河非定常流水面数学模型
本文研究了河流或水系中可能存在的边界条件下明渠的非定常流动问题。利用软件水文工程中心-河流分析系统(HEC-RAS)进行了案例研究。该软件基于一维形式的Saint-Venant方程,通过隐式有限差分格式形成离散形式,然后使用Newton-Raphson迭代程序和改进的高斯消去技术求解,建立了模拟明渠非定常流动的水动力模型。在HEC-RAS应用程序的帮助下采用的案例研究应用于Al Msharah河(河道)的河段(上游)和Al Malah桥(下游)之间,全长(49公里)分为(52)个横截面。模型运行和结果与实际现场数据的比较表明,(θ=1,∆t=5分钟)所得结果的精度是可以接受的,其中θ为加权参数,∆t为时间间隔。本文涵盖了正常流深的情况和2006年1月至2006年7月期间的观测水位资料。结果表明,在距离上游17.5 Km处(断面30)的Al Am’arah市可能发生洪涝,建议对断面进行调整,以防止该区域发生洪涝。最后,利用AL - Msharah河流域的观测资料(水位)对研究河段的水动力模型进行了标定,结果表明两者吻合较好。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
THE STUDYOF INSULATING PROPERTIES OF REFRACTORY BRICKS PRODUCED USING MELON SEED HUSKSAS POREFORMER BIO-ADSORPTION OF HEAVY METAL ION FROM WATER USING ACTIVATED CARBON EFFECT OF ZIRCONIUM ADDITION ON MICROSTRUCTURE AND PROPERTIES OF PURE TI PRODUCED BY POWDER METALLURGY DEVELOPMENT OF MICROSTRUCTURE, MECHANICAL AND WEAR CHARACTERISTICS OF THE BRASS ALLOY PROCESSED BY ECAP HIGHLY EFFICIENT INVERTER BLOCKS IN QCA TECHNOLOGY
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1