The use of nanodiamonds in the seeding of CVD diamond and in heterogeneous catalysis

J. G. Buijnsters, S. Carabineiro, A.M.T. Silva, L. M. Pastrana-Martínez, S. Morales-Torres, J. Faria, J. Figueiredo
{"title":"The use of nanodiamonds in the seeding of CVD diamond and in heterogeneous catalysis","authors":"J. G. Buijnsters, S. Carabineiro, A.M.T. Silva, L. M. Pastrana-Martínez, S. Morales-Torres, J. Faria, J. Figueiredo","doi":"10.1109/NANOFIM.2015.8425346","DOIUrl":null,"url":null,"abstract":"In this work, the use of nanodiamonds (NDs; 2–10 nm) in the seeding of diamond films grown by chemical vapor deposition (CVD) and in the synthesis of composite TiO2-nanodiamond photocatalysts is discussed. First, enhanced growth of faceted, nanocrystalline diamond (NCD) films by hot filament CVD at moderate substrate temperature (650°C) and carbon-lean gas chemistry (1.0% CH4 in H2) is demonstrated. The enhancement of diamond nucleation and growth on Si substrates is achieved by using a sputter deposition of different metallic (Cr, Nb, Ti, V, and W) nanolayers and an ultrasonic seeding with NDs. We conclude that the kinetics of diamond nucleation in the NCD film growth is determined by the number density of NDs embedded on the nanorough metallic surfaces after ultrasonic pretreatment and by the specific surface chemistry (i.e., carbon diffusivity and carburization) during diamond growth. Second., the synthesis and application of composites based on microdiamonds and NDs for the photocatalytic degradation of diphenhydramine pharmaceutical water pollutant is demonstrated. Micro- and nanodiamond powders were combined with TiO2, varying the carbon phase content and tested as composite photocatalysts under near UV-Vis irradiation. The thus prepared composites exhibited higher photocatalytic activity than the respective bare materials. Best photocatalytic performance was observed in the case of using composites with 15 wt.% of NDs oxidized in air at 703 K.","PeriodicalId":413629,"journal":{"name":"2015 1st Workshop on Nanotechnology in Instrumentation and Measurement (NANOFIM)","volume":"23 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2015-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2015 1st Workshop on Nanotechnology in Instrumentation and Measurement (NANOFIM)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/NANOFIM.2015.8425346","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

In this work, the use of nanodiamonds (NDs; 2–10 nm) in the seeding of diamond films grown by chemical vapor deposition (CVD) and in the synthesis of composite TiO2-nanodiamond photocatalysts is discussed. First, enhanced growth of faceted, nanocrystalline diamond (NCD) films by hot filament CVD at moderate substrate temperature (650°C) and carbon-lean gas chemistry (1.0% CH4 in H2) is demonstrated. The enhancement of diamond nucleation and growth on Si substrates is achieved by using a sputter deposition of different metallic (Cr, Nb, Ti, V, and W) nanolayers and an ultrasonic seeding with NDs. We conclude that the kinetics of diamond nucleation in the NCD film growth is determined by the number density of NDs embedded on the nanorough metallic surfaces after ultrasonic pretreatment and by the specific surface chemistry (i.e., carbon diffusivity and carburization) during diamond growth. Second., the synthesis and application of composites based on microdiamonds and NDs for the photocatalytic degradation of diphenhydramine pharmaceutical water pollutant is demonstrated. Micro- and nanodiamond powders were combined with TiO2, varying the carbon phase content and tested as composite photocatalysts under near UV-Vis irradiation. The thus prepared composites exhibited higher photocatalytic activity than the respective bare materials. Best photocatalytic performance was observed in the case of using composites with 15 wt.% of NDs oxidized in air at 703 K.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
纳米金刚石在CVD金刚石播种和多相催化中的应用
在这项工作中,纳米金刚石(NDs;本文讨论了化学气相沉积(CVD)法生长金刚石薄膜时tio2 -纳米金刚石复合光催化剂的制备方法。首先,在中等衬底温度(650°C)和低碳气体化学(H2中CH4含量为1.0%)条件下,通过热丝CVD技术增强了纳米晶金刚石(NCD)薄膜的生长。通过溅射沉积不同的金属(Cr, Nb, Ti, V和W)纳米层和nd的超声波播种,在Si衬底上增强了金刚石的形核和生长。我们得出结论,金刚石在NCD膜生长过程中的成核动力学是由超声预处理后纳米级金属表面上嵌入的nd的数量密度和金刚石生长过程中的特定表面化学(即碳扩散率和渗碳)决定的。第二。介绍了微金刚石和钕基复合材料的合成及其在光催化降解苯海拉明类药物水污染物中的应用。将微金刚石和纳米金刚石粉末与TiO2复合,改变碳相含量,并在近紫外可见照射下作为复合光催化剂进行测试。所制备的复合材料比相应的裸材料具有更高的光催化活性。在703k的空气中,氧化率为15wt .%的NDs复合材料的光催化性能最好。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Air/methane mixture ignition with Multi-Walled Carbon Nanotubes (MWCNTs) and comparison with spark ignition Effective Targeting of Hepatocellular Carcinoma through Glypican-3 Ligand Peptide Functionalization of Silica Nanoparticles Exploring CVD techniques for the growth of novel carbon nanostructures Highly Improved Cytocompatibility of Halloysite Nanotubes through Polymeric Surface Modification Carbon Nanotube Polymer Composites for High Performance Strain Sensors
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1