Physicochemical Charastaristics of Leather Goat Quality from less Tanning Process

Dhea Try Anggraeny, Khothibul Umam Al Awwaly, A. Manab
{"title":"Physicochemical Charastaristics of Leather Goat Quality from less Tanning Process","authors":"Dhea Try Anggraeny, Khothibul Umam Al Awwaly, A. Manab","doi":"10.32996/jeas.2022.3.3.5","DOIUrl":null,"url":null,"abstract":"This research is to determine the percentage of chromium and the type of solvent in terms of the physicochemical quality of wet blue and leather from the waterless tanning process. This research was carried out from November 2021 to February 2022 at the Laboratory of the Yogyakarta Center for Leather, Rubber, and Plastics. The research method used was a Nested Completely Randomized Design (CRD) with 2-factor nested patterns, Factor 1 is percentage of chromium (A = 3%, B = 4% and C = 5%) and factor 2 namely different types of solvents (L1 = Water, L2 = Ethanol and L3 = acetone) with 3 replications. The materials used in this study were Etawa crossbreed goat skin and chromium, and the type of solvents was water, ethanol, and acetone. The variables observed were the physicochemical quality of the finished leather (stricter strength, tensile strength, elongation at break, moisture content, total chromium, ash content, fat content, and pH). The data obtained from the results of the research were analyzed using Analysis of Variance (ANOVA) if there were significantly different results obtained, followed by Duncan's Multiple Range Test (DMRT). On the physicochemical quality of the finished leather (leather), the results of this study showed that the type of solvent had a very significant difference (P < 0.01) in the physicochemical quality of the leather except for pH. The percentage of chromium nested in the type of solvent showed a very significant difference (P<0.01) in the quality of the finished leather. Based on the results of the research, the percentage of chromium nested in the type of solvent was about SNI 2981:2009; from this study, it can be concluded that Phase I research had the physicochemical quality of finished leather with an average stricter strength of 14.40 N/ cm2, tensile strength 15.40 N/cm2, elongation at break 54.32%, water content 4.76%, total chromium 3.64%, ash content 4.62%, fat content 2.44% and pH 4.41.","PeriodicalId":202277,"journal":{"name":"Journal of Environmental and Agricultural Studies","volume":"36 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-10-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Environmental and Agricultural Studies","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.32996/jeas.2022.3.3.5","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

This research is to determine the percentage of chromium and the type of solvent in terms of the physicochemical quality of wet blue and leather from the waterless tanning process. This research was carried out from November 2021 to February 2022 at the Laboratory of the Yogyakarta Center for Leather, Rubber, and Plastics. The research method used was a Nested Completely Randomized Design (CRD) with 2-factor nested patterns, Factor 1 is percentage of chromium (A = 3%, B = 4% and C = 5%) and factor 2 namely different types of solvents (L1 = Water, L2 = Ethanol and L3 = acetone) with 3 replications. The materials used in this study were Etawa crossbreed goat skin and chromium, and the type of solvents was water, ethanol, and acetone. The variables observed were the physicochemical quality of the finished leather (stricter strength, tensile strength, elongation at break, moisture content, total chromium, ash content, fat content, and pH). The data obtained from the results of the research were analyzed using Analysis of Variance (ANOVA) if there were significantly different results obtained, followed by Duncan's Multiple Range Test (DMRT). On the physicochemical quality of the finished leather (leather), the results of this study showed that the type of solvent had a very significant difference (P < 0.01) in the physicochemical quality of the leather except for pH. The percentage of chromium nested in the type of solvent showed a very significant difference (P<0.01) in the quality of the finished leather. Based on the results of the research, the percentage of chromium nested in the type of solvent was about SNI 2981:2009; from this study, it can be concluded that Phase I research had the physicochemical quality of finished leather with an average stricter strength of 14.40 N/ cm2, tensile strength 15.40 N/cm2, elongation at break 54.32%, water content 4.76%, total chromium 3.64%, ash content 4.62%, fat content 2.44% and pH 4.41.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
少鞣制革山羊品质的理化特征
本研究是根据无水制革过程中湿蓝和皮革的理化质量来确定铬的百分比和溶剂的类型。这项研究于2021年11月至2022年2月在日惹皮革、橡胶和塑料中心实验室进行。采用嵌套式完全随机设计(CRD), 2因素嵌套模式,因子1为铬的百分比(a = 3%, B = 4%, C = 5%),因子2为不同类型的溶剂(L1 =水,L2 =乙醇,L3 =丙酮),3个重复。本研究的材料为埃塔瓦杂交山羊皮和铬,溶剂类型为水、乙醇和丙酮。观察到的变量是成品皮革的理化质量(严格强度、拉伸强度、断裂伸长率、水分含量、总铬含量、灰分含量、脂肪含量和pH值)。若研究结果存在显著差异,则采用方差分析(ANOVA)对所得数据进行分析,然后进行Duncan多元极差检验(DMRT)。在成品皮(革)的理化品质上,本研究结果表明,除ph值外,溶剂类型对成品皮的理化品质有极显著差异(P<0.01),不同溶剂类型的铬嵌套率对成品皮的理化品质有极显著差异(P<0.01)。根据研究结果,该溶剂中嵌套铬的比例约为SNI 2981:2009;由本研究可知,一期成品皮革的理化质量为:平均硬度为14.40 N/cm2,拉伸强度为15.40 N/cm2,断裂伸长率为54.32%,含水量为4.76%,总铬含量为3.64%,灰分含量为4.62%,脂肪含量为2.44%,pH值为4.41。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Cobalt 60 (60Co) Gamma Ray Irradiation for Genetic Improvement of Edamame Plant Growth and Yield (Glycine max. (L) Merril) M2 Generation Exploration of the Application of Agricultural Intelligent Robots in the Qinghai-Tibet Plateau Development of Processing of Agricultural Products by Women in Villages and its Role on the Economy of Rural Families Takhar Province Morphometric Analysis for the Watershed Management of Amu River Basin in Afghanistan by using Remote Sensing & GIS Break-Even Point Analysis of Liquid Inorganic Fertilizer Business: A Case Study of Gapoktan Bubun Rondon, Alla District, Enrekang Regency
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1