An integral manifold approach to the feedback control of flexible joint robots

M. Spong, K. Khorasani, P. Kokotovic
{"title":"An integral manifold approach to the feedback control of flexible joint robots","authors":"M. Spong, K. Khorasani, P. Kokotovic","doi":"10.1109/JRA.1987.1087102","DOIUrl":null,"url":null,"abstract":"The control problem for robot manipulators with flexible joints is considered. The results are based on a recently developed singular perturbation formulation of the manipulator equations of motion where the singular perturbation parameter µ is the inverse of the joint stiffness. For this class of systems it is known that the reduced-order model corresponding to the mechanical system under the assumption of perfect rigidity is globally linearizable via nonlinear static-state feedback, but that the full-order flexible system is not, in general, linearizable in this manner. The concept of integral manifold is utilized to represent the dynamics of the slow subsystem. The slow subsystem reduces to the rigid model as the perturbation parameter µ tends to zero. It is shown that linearizability of the rigid model implies linearizability of the flexible system restricted to the integral manifold. Based on a power series expansion of the integral manifold around µ = 0, it is shown how to approximate the feedback linearizing control to any order in µ. The result is then an approximate feedback linearization which, assuming stability of the fast variables, linearizes the system for all practical purposes.","PeriodicalId":370047,"journal":{"name":"IEEE J. Robotics Autom.","volume":"108 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1987-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"441","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE J. Robotics Autom.","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/JRA.1987.1087102","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 441

Abstract

The control problem for robot manipulators with flexible joints is considered. The results are based on a recently developed singular perturbation formulation of the manipulator equations of motion where the singular perturbation parameter µ is the inverse of the joint stiffness. For this class of systems it is known that the reduced-order model corresponding to the mechanical system under the assumption of perfect rigidity is globally linearizable via nonlinear static-state feedback, but that the full-order flexible system is not, in general, linearizable in this manner. The concept of integral manifold is utilized to represent the dynamics of the slow subsystem. The slow subsystem reduces to the rigid model as the perturbation parameter µ tends to zero. It is shown that linearizability of the rigid model implies linearizability of the flexible system restricted to the integral manifold. Based on a power series expansion of the integral manifold around µ = 0, it is shown how to approximate the feedback linearizing control to any order in µ. The result is then an approximate feedback linearization which, assuming stability of the fast variables, linearizes the system for all practical purposes.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
柔性关节机器人反馈控制的积分流形方法
研究了柔性关节机器人的控制问题。该结果基于最近开发的机械臂运动方程的奇异摄动公式,其中奇异摄动参数μ是关节刚度的逆。对于这类系统,已知在完全刚性假设下的机械系统对应的降阶模型通过非线性静态反馈是全局线性化的,但对于全阶柔性系统,通常不是这样线性化的。采用积分流形的概念来表示慢速子系统的动力学特性。当扰动参数μ趋于零时,慢子系统退化为刚性模型。证明了刚性模型的线性化意味着限于积分流形的柔性系统的线性化。基于积分流形在μ = 0附近的幂级数展开式,给出了如何将反馈线性化控制近似到μ中的任意阶。结果是一个近似的反馈线性化,假设快速变量的稳定性,线性化系统为所有实际目的。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Omnidirectional supervisory control of a multilegged vehicle using periodic gaits Symbolic derivation of dynamic equations of motion for robot manipulators using Piogram symbolic method A group-theoretic approach to the computation of symbolic part relations Robot calibration and compensation Fixed-axis tool positioning with built-in global interference checking for NC path generation
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1