Yield Response of Biodiesel Production from Heterogeneous and Homogeneous Catalysis of Milk Bush Seed (Thevetia peruviana) Oil

Abstract

ABSTRACT Conventional production of biodiesel employs the use of alkaline catalysts because they are cheaper and less corrosive, and they use minimal energy when compared to other acidic catalysts. Heterogeneous catalysts have also shown significant effects on biodiesel production with its ease of recovery and reusability. Three reaction variables—temperature, time, and molar ratio of alcohol to oil—were optimized for biodiesel production from milk bush oil using snail shell as a catalyst. The catalyst was prepared by calcinating waste giant African land snail in an electric oven for 3.5 hours at 900°C. Also, a control transesterification experiment was carried out using potassium hydroxide (KOH) as a catalyst. Catalyst concentrations of 3.0 wt % of calcined snail shell (CSS) and KOH were used for the transesterification of the oil. A response surface analysis of biodiesel production using CSS as a catalyst showed that all reaction variables were significant. Biodiesel yield of 81% was recorded experimentally as the highest yield when temperature, reaction time, and alcohol-to-oil ratio were 65°C, 2 hours, and 9:1, respectively. An average yield of 94.33% was obtained at these same reaction conditions when KOH was used as a catalyst.