A. Komine, Tohru Yamaguchi, M. Kikuchi, Y. Kibayashi
{"title":"The Effect of the Surface Working Process on the Patigue Strength of Carburized Steels","authors":"A. Komine, Tohru Yamaguchi, M. Kikuchi, Y. Kibayashi","doi":"10.1299/KIKAIA.53.702","DOIUrl":null,"url":null,"abstract":"The effect of surface working (shot peening) and additional post working heat treatment on the fatigue properties of carburized steel with surface structure anomalies was evaluated through rotating bending fatigue tests. Smooth specimens with various surface roughness and notched specimens were gas carburized and shot peened. Some smooth specimens were tempered after shot peening to examine the effect of post working heat treatment. Hardness, residual stress and the amount of retained austenite near the surface of the carburized and shot peened specimens were measured. The fatigue strength of all of the shot peened specimens increased and was as much as 90% higher than that of carburized specimens. The smooth specimen tempered at 100°C after shot peening gave the highest fatigue strength among all samples tested in this study.","PeriodicalId":286527,"journal":{"name":"JSME international journal : bulletin of the JSME","volume":"36 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1987-12-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"JSME international journal : bulletin of the JSME","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1299/KIKAIA.53.702","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 2
Abstract
The effect of surface working (shot peening) and additional post working heat treatment on the fatigue properties of carburized steel with surface structure anomalies was evaluated through rotating bending fatigue tests. Smooth specimens with various surface roughness and notched specimens were gas carburized and shot peened. Some smooth specimens were tempered after shot peening to examine the effect of post working heat treatment. Hardness, residual stress and the amount of retained austenite near the surface of the carburized and shot peened specimens were measured. The fatigue strength of all of the shot peened specimens increased and was as much as 90% higher than that of carburized specimens. The smooth specimen tempered at 100°C after shot peening gave the highest fatigue strength among all samples tested in this study.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
