Multi-view feature fusion fault diagnosis method based on an improved temporal convolutional network

IF 1 4区 工程技术 Q4 INSTRUMENTS & INSTRUMENTATION Insight Pub Date : 2023-10-01 DOI:10.1784/insi.2023.65.10.559
Zhiwu Shang, Hu Liu, Baoren Zhang, Zehua Feng, Wanxiang Li
{"title":"Multi-view feature fusion fault diagnosis method based on an improved temporal convolutional network","authors":"Zhiwu Shang, Hu Liu, Baoren Zhang, Zehua Feng, Wanxiang Li","doi":"10.1784/insi.2023.65.10.559","DOIUrl":null,"url":null,"abstract":"This paper addresses the problem of fault identification in rotating machinery by analysing vibration data using a neural network approach. Temporal convolutional networks (TCNs) have attracted a lot of focus in the domain of fault identification; however, TCN convolution kernels are small and susceptible to high-frequency noise interference. Furthermore, the default weight coefficient of the internal residual connection is 1. When there are few residual blocks, the residual block characteristic extraction ability is suppressed and only the vibration signal collected at a single location is utilised for fault diagnosis as it contains incomprehensive fault information. To tackle the above issues, this paper proposes a multi-view feature fusion fault diagnosis algorithm with an adaptive residual coefficient assignment TCN with wide first-layer kernels (WD-ARCATCN). Firstly, a WD-ARCATCN feature extraction network is designed to extract deep state features from different views and the first layer of the TCN is set as a wide-kernel (WD) convolutional layer to suppress high-frequency noise. An adaptive residual coefficient assignment (ARCA) unit is designed in the residual connection to increase the characteristic learning capability of the residual blocks and the residual blocks with ARCA units are stacked to further extract multi-view deep fault features. In this paper, acceleration signals collected at different positions are used as the multi-view feature source for the first time and the fault information contained is more comprehensive. Then, based on a self-attention mechanism, the multi-view feature fusion method is improved and the view weights are adaptively assigned to effectively fuse different view characteristics and enhance the identification of the fault characteristics. Finally, the mapping between the multi-view fusion features and the labels is achieved using a softmax classifier. The algorithm has been tested using experimental data from the bearing vibration database at Case Western Reserve University (CWRU) and it performed much better compared to other diagnostic algorithms.","PeriodicalId":13956,"journal":{"name":"Insight","volume":"44 1","pages":"0"},"PeriodicalIF":1.0000,"publicationDate":"2023-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Insight","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1784/insi.2023.65.10.559","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"INSTRUMENTS & INSTRUMENTATION","Score":null,"Total":0}
引用次数: 1

Abstract

This paper addresses the problem of fault identification in rotating machinery by analysing vibration data using a neural network approach. Temporal convolutional networks (TCNs) have attracted a lot of focus in the domain of fault identification; however, TCN convolution kernels are small and susceptible to high-frequency noise interference. Furthermore, the default weight coefficient of the internal residual connection is 1. When there are few residual blocks, the residual block characteristic extraction ability is suppressed and only the vibration signal collected at a single location is utilised for fault diagnosis as it contains incomprehensive fault information. To tackle the above issues, this paper proposes a multi-view feature fusion fault diagnosis algorithm with an adaptive residual coefficient assignment TCN with wide first-layer kernels (WD-ARCATCN). Firstly, a WD-ARCATCN feature extraction network is designed to extract deep state features from different views and the first layer of the TCN is set as a wide-kernel (WD) convolutional layer to suppress high-frequency noise. An adaptive residual coefficient assignment (ARCA) unit is designed in the residual connection to increase the characteristic learning capability of the residual blocks and the residual blocks with ARCA units are stacked to further extract multi-view deep fault features. In this paper, acceleration signals collected at different positions are used as the multi-view feature source for the first time and the fault information contained is more comprehensive. Then, based on a self-attention mechanism, the multi-view feature fusion method is improved and the view weights are adaptively assigned to effectively fuse different view characteristics and enhance the identification of the fault characteristics. Finally, the mapping between the multi-view fusion features and the labels is achieved using a softmax classifier. The algorithm has been tested using experimental data from the bearing vibration database at Case Western Reserve University (CWRU) and it performed much better compared to other diagnostic algorithms.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基于改进时间卷积网络的多视图特征融合故障诊断方法
本文采用神经网络方法对旋转机械的振动数据进行分析,解决了故障识别问题。时间卷积网络(tcn)在故障识别领域引起了广泛的关注。然而,TCN卷积核很小,容易受到高频噪声干扰。此外,内部残余连接的默认权重系数为1。当残差块较少时,残差块特征提取能力受到抑制,仅利用单个位置采集到的振动信号进行故障诊断,其包含的故障信息不全面。针对上述问题,本文提出了一种基于自适应残差系数分配的宽第一层核TCN (WD-ARCATCN)多视图特征融合故障诊断算法。首先,设计WD- arcatcn特征提取网络,从不同角度提取深度状态特征,并将TCN的第一层设置为宽核(WD)卷积层,抑制高频噪声;残差连接中设计了自适应残差系数分配(ARCA)单元,提高残差块的特征学习能力,并对带有ARCA单元的残差块进行叠加,进一步提取多视图深断层特征。本文首次采用不同位置采集的加速度信号作为多视图特征源,所包含的故障信息更加全面。然后,基于自关注机制,改进多视图特征融合方法,自适应分配视图权重,有效融合不同视图特征,增强故障特征的识别能力;最后,使用softmax分类器实现多视图融合特征与标签之间的映射。该算法已经使用凯斯西储大学(CWRU)轴承振动数据库的实验数据进行了测试,与其他诊断算法相比,它的性能要好得多。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Insight
Insight 工程技术-材料科学:表征与测试
CiteScore
1.50
自引率
9.10%
发文量
0
审稿时长
2.8 months
期刊介绍: Official Journal of The British Institute of Non-Destructive Testing - includes original research and devlopment papers, technical and scientific reviews and case studies in the fields of NDT and CM.
期刊最新文献
ISSUE INFORMATION Innovation Ecosystem Dynamics, Value and Learning I: What Can Hamilton Tell Us? Realizing the Promise of Digital Engineering: Planning, Implementing, and Evolving the Ecosystem Requirements Statements Are Transfer Functions: An Insight from Model-Based Systems Engineering Feelings and Physics: Emotional, Psychological, and Other Soft Human Requirements, by Model-Based Systems Engineering
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1