Convective Heat Transfer and Entropy Generation Analysis in Elliptic Microchannels

IF 1.9 4区 工程技术 Q2 ENGINEERING, MECHANICAL Journal of Heat Transfer-transactions of The Asme Pub Date : 2023-11-02 DOI:10.1115/1.4063962
Liangbin Su, Yongyi Yang
{"title":"Convective Heat Transfer and Entropy Generation Analysis in Elliptic Microchannels","authors":"Liangbin Su, Yongyi Yang","doi":"10.1115/1.4063962","DOIUrl":null,"url":null,"abstract":"Abstract In this paper, we investigate analytically the first and the second law characteristics of fully developed gaseous slip flow with the H1 boundary condition through elliptical microchannels. The closed-form solution of temperature distribution was obtained with the separation of variables method. Expressions for the Nusselt number, the non-dimensional entropy generation rate, and the Bejan number were further deduced. The influences of crucial factors, including viscous dissipation, rarefaction, aspect ratio, and fluid axial heat conduction, have been carefully evaluated. The results indicated that viscous dissipation has a dramatic impact on heat transfer characteristics. But the rarefaction effect was found to significantly reduce the effect of the viscous dissipation on the Nusselt number, and the former may not deteriorate the heat transfer performance when considering the viscous dissipation. The main source of the entropy generation rate is controlled by fluid axial heat conduction when the Peclet number is less than one. The impacts of the viscous dissipation, the rarefaction, and the aspect ratio on entropy generation are magnified when fluid axial conduction dominates the irreversibility. The analytical solutions of the current study will make it possible to compare, evaluate, and optimize alternative elliptical microchannel heat exchanger design options.","PeriodicalId":15937,"journal":{"name":"Journal of Heat Transfer-transactions of The Asme","volume":"30 3","pages":"0"},"PeriodicalIF":1.9000,"publicationDate":"2023-11-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Heat Transfer-transactions of The Asme","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1115/1.4063962","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0

Abstract

Abstract In this paper, we investigate analytically the first and the second law characteristics of fully developed gaseous slip flow with the H1 boundary condition through elliptical microchannels. The closed-form solution of temperature distribution was obtained with the separation of variables method. Expressions for the Nusselt number, the non-dimensional entropy generation rate, and the Bejan number were further deduced. The influences of crucial factors, including viscous dissipation, rarefaction, aspect ratio, and fluid axial heat conduction, have been carefully evaluated. The results indicated that viscous dissipation has a dramatic impact on heat transfer characteristics. But the rarefaction effect was found to significantly reduce the effect of the viscous dissipation on the Nusselt number, and the former may not deteriorate the heat transfer performance when considering the viscous dissipation. The main source of the entropy generation rate is controlled by fluid axial heat conduction when the Peclet number is less than one. The impacts of the viscous dissipation, the rarefaction, and the aspect ratio on entropy generation are magnified when fluid axial conduction dominates the irreversibility. The analytical solutions of the current study will make it possible to compare, evaluate, and optimize alternative elliptical microchannel heat exchanger design options.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
椭圆微通道内对流换热及熵产分析
摘要本文分析研究了带H1边界条件的椭圆微通道内完全发育的气体滑移流动的第一定律和第二定律特性。用分离变量法得到了温度分布的封闭解。进一步推导了Nusselt数、无量纲熵生成率和Bejan数的表达式。对包括粘性耗散、稀薄、展弦比和流体轴向热传导在内的关键因素的影响进行了仔细的评估。结果表明,粘性耗散对换热特性有显著影响。但研究发现,稀薄效应显著降低了粘性耗散对努塞尔数的影响,考虑粘性耗散时,稀薄效应并不会影响换热性能。当Peclet数小于1时,熵产率的主要来源是流体轴向热传导。当流体轴向传导主导不可逆性时,粘性耗散、稀薄和展弦比对熵产的影响被放大。当前研究的分析解决方案将使比较、评估和优化备选椭圆微通道热交换器设计方案成为可能。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
182
审稿时长
4.7 months
期刊介绍: Topical areas including, but not limited to: Biological heat and mass transfer; Combustion and reactive flows; Conduction; Electronic and photonic cooling; Evaporation, boiling, and condensation; Experimental techniques; Forced convection; Heat exchanger fundamentals; Heat transfer enhancement; Combined heat and mass transfer; Heat transfer in manufacturing; Jets, wakes, and impingement cooling; Melting and solidification; Microscale and nanoscale heat and mass transfer; Natural and mixed convection; Porous media; Radiative heat transfer; Thermal systems; Two-phase flow and heat transfer. Such topical areas may be seen in: Aerospace; The environment; Gas turbines; Biotechnology; Electronic and photonic processes and equipment; Energy systems, Fire and combustion, heat pipes, manufacturing and materials processing, low temperature and arctic region heat transfer; Refrigeration and air conditioning; Homeland security systems; Multi-phase processes; Microscale and nanoscale devices and processes.
期刊最新文献
Thermal Resistance Of Heated Superhydrophobic Channels with Streamwise Thermocapillary Stress Analysis of Drying Front Propagation and Coupled Heat and Mass Transfer During Evaporation From Additively-Manufactured Porous Structures Under a Solar Flux Significant Enhancement of Near-Field Radiative Heat Transfer by Misaligned Bilayer Heterostructure of Graphene-Covered Gratings Influence of Buoyancy and Inter-Surface Radiation on Confined Jet Impingement Cooling of a Semi-Cylindrical Concave Plate Significance of Upstream Wall Conditions in Characterizing the Heat Transfer Phenomena of Rarefied Flows
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1