{"title":"COMPRESSIVE AND SHEAR STRENGTH OF COARSE SILT STABILIZED WITH TERRAMIX F22.5 BINDER","authors":"Katarzyna Kamińska","doi":"10.15576/asp.fc/2023.22.2.04","DOIUrl":null,"url":null,"abstract":"Aim of the study: The paper presents the results of testing the compressive strength, frost resistance and shear strength of stabilized fine-grained soil depending on the added hydraulic binder and the time and method of curing. Material and methods: The tests were performed for a coarse silt collected in Boczkowice (Małopolskie Voivodship). The stabilizer used in the tests was Terramix F22.5, added in the amount of 3, 5 and 8% in relation to the dry mass of skeleton. The tests were carried out on samples immediately after stabilization, after 7 and 28 days of treatment with water and after 7 and 28 days with freezing and thawing cycles, as well as for samples without the addition of a stabilizer. Results and conclusions: On the basis of the conducted tests, it was found that the binder content used as well as the length and method of sample curing influence the improvement of geotechnical parameters. Both the compressive and shear strength of the tested soil samples depend on the method of sample care, as well as the value of the binder addition. The method of sample curing had the greatest influence on the compressive strength of the soil. Protecting the stabilized soil against water causes a significant increase in compressive strength, the enhance of compressive strength of the samples was up to 40%. The shear strength, and thus the values of the angle of internal friction and the cohesion of coarse silt, were significantly affected by content of the stabilizer. The both parameters increased with the increase of the binder addition.","PeriodicalId":51904,"journal":{"name":"Acta Scientiarum Polonorum-Formatio Circumiectus","volume":"86 1","pages":"0"},"PeriodicalIF":0.4000,"publicationDate":"2023-08-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Scientiarum Polonorum-Formatio Circumiectus","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.15576/asp.fc/2023.22.2.04","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"AGRONOMY","Score":null,"Total":0}
引用次数: 0
Abstract
Aim of the study: The paper presents the results of testing the compressive strength, frost resistance and shear strength of stabilized fine-grained soil depending on the added hydraulic binder and the time and method of curing. Material and methods: The tests were performed for a coarse silt collected in Boczkowice (Małopolskie Voivodship). The stabilizer used in the tests was Terramix F22.5, added in the amount of 3, 5 and 8% in relation to the dry mass of skeleton. The tests were carried out on samples immediately after stabilization, after 7 and 28 days of treatment with water and after 7 and 28 days with freezing and thawing cycles, as well as for samples without the addition of a stabilizer. Results and conclusions: On the basis of the conducted tests, it was found that the binder content used as well as the length and method of sample curing influence the improvement of geotechnical parameters. Both the compressive and shear strength of the tested soil samples depend on the method of sample care, as well as the value of the binder addition. The method of sample curing had the greatest influence on the compressive strength of the soil. Protecting the stabilized soil against water causes a significant increase in compressive strength, the enhance of compressive strength of the samples was up to 40%. The shear strength, and thus the values of the angle of internal friction and the cohesion of coarse silt, were significantly affected by content of the stabilizer. The both parameters increased with the increase of the binder addition.