Electrical discharge resistance of polymeric nanocomposites

IF 3.8 Q2 ENGINEERING, ELECTRICAL & ELECTRONIC IET Nanodielectrics Pub Date : 2021-04-08 DOI:10.1049/nde2.12019
Srijib Banerjee, Shelly Saini, Shakthi Prasad D
{"title":"Electrical discharge resistance of polymeric nanocomposites","authors":"Srijib Banerjee,&nbsp;Shelly Saini,&nbsp;Shakthi Prasad D","doi":"10.1049/nde2.12019","DOIUrl":null,"url":null,"abstract":"<p>The trend of choosing insulating materials has changed in the past few decades, and a considerable shift has occurred from conventional ceramic to non-ceramic insulating materials. The addition of inorganic fillers has greatly improved the thermal conductivity, discharge resistance, hydrophobicity recovery, and vandalism-resistance properties of polymeric insulating materials. Since the beginning of the present century, the field of nanomaterial research has gained much attention. Several studies have been conducted to investigate and analyze polymer nanocomposites by adding nanoparticles of varying size and concentration as fillers. The aim is to improve the characteristics and reformation of thermal, electrical, and mechanical properties of existing polymeric insulation materials. However, certain inconsistencies are prevalent with results obtained for polymer nanocomposites. A comprehensive review is presented based on available literature focussing on the advancement from polymeric insulating materials to polymeric nanocomposites and its impact on partial discharge resistance, surface charging, and tracking and erosion resistance. It is observed that the weight percent and dispersion of nano- or micro-sized particles into the base polymer matrix governs the performance of polymer composites. At higher filler loading, resistance to partial discharge and tracking and erosion decreases as a result of the agglomeration of fillers, whereas resistance to surface charge accumulation increases at higher filler loading because the formation of shallow traps increases the charge decay rate. It is suggested that when both micro- and nanofillers are mixed in proper proportion, micro–nano hybrid composites provide better performance than composites filled with only nano- or microfillers.</p>","PeriodicalId":36855,"journal":{"name":"IET Nanodielectrics","volume":"4 4","pages":"210-222"},"PeriodicalIF":3.8000,"publicationDate":"2021-04-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://ietresearch.onlinelibrary.wiley.com/doi/epdf/10.1049/nde2.12019","citationCount":"3","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IET Nanodielectrics","FirstCategoryId":"1085","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1049/nde2.12019","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 3

Abstract

The trend of choosing insulating materials has changed in the past few decades, and a considerable shift has occurred from conventional ceramic to non-ceramic insulating materials. The addition of inorganic fillers has greatly improved the thermal conductivity, discharge resistance, hydrophobicity recovery, and vandalism-resistance properties of polymeric insulating materials. Since the beginning of the present century, the field of nanomaterial research has gained much attention. Several studies have been conducted to investigate and analyze polymer nanocomposites by adding nanoparticles of varying size and concentration as fillers. The aim is to improve the characteristics and reformation of thermal, electrical, and mechanical properties of existing polymeric insulation materials. However, certain inconsistencies are prevalent with results obtained for polymer nanocomposites. A comprehensive review is presented based on available literature focussing on the advancement from polymeric insulating materials to polymeric nanocomposites and its impact on partial discharge resistance, surface charging, and tracking and erosion resistance. It is observed that the weight percent and dispersion of nano- or micro-sized particles into the base polymer matrix governs the performance of polymer composites. At higher filler loading, resistance to partial discharge and tracking and erosion decreases as a result of the agglomeration of fillers, whereas resistance to surface charge accumulation increases at higher filler loading because the formation of shallow traps increases the charge decay rate. It is suggested that when both micro- and nanofillers are mixed in proper proportion, micro–nano hybrid composites provide better performance than composites filled with only nano- or microfillers.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
高分子纳米复合材料的放电电阻
在过去的几十年里,绝缘材料的选择趋势发生了变化,从传统的陶瓷绝缘材料到非陶瓷绝缘材料发生了相当大的转变。无机填料的加入大大提高了高分子绝缘材料的导热性能、放电性能、疏水性恢复性能和抗破坏性能。自本世纪初以来,纳米材料的研究领域受到了广泛的关注。通过添加不同尺寸和浓度的纳米颗粒作为填料,对聚合物纳米复合材料进行了研究和分析。目的是改进现有聚合物绝缘材料的特性,并对其热学、电学和力学性能进行改造。然而,某些不一致的结果普遍存在于聚合物纳米复合材料中。本文在现有文献的基础上,对聚合物绝缘材料到聚合物纳米复合材料的发展及其对局部放电电阻、表面充电、跟踪和耐侵蚀性能的影响进行了综述。研究发现,纳米或微米颗粒在聚合物基体中的重量百分比和分散程度决定了聚合物复合材料的性能。在较高的填料负荷下,由于填料的团聚,对局部放电、跟踪和侵蚀的阻力降低,而在较高的填料负荷下,对表面电荷积累的阻力增加,因为浅层陷阱的形成增加了电荷衰减率。结果表明,当微纳填料以适当的比例混合时,微纳混杂复合材料的性能优于只填充纳米填料或微纳填料的复合材料。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
IET Nanodielectrics
IET Nanodielectrics Materials Science-Materials Chemistry
CiteScore
5.60
自引率
3.70%
发文量
7
审稿时长
21 weeks
期刊最新文献
A combined technique for power transformer fault diagnosis based on k-means clustering and support vector machine Improvement in non-linear electrical conductivity of silicone rubber by incorporating zinc oxide fillers and grafting small polar molecules Traditional fault diagnosis methods for mineral oil-immersed power transformer based on dissolved gas analysis: Past, present and future Enhanced thermal conductivity and self-healing property of PUDA/boron nitride micro-sheets composites with a small number of graphene nano-platelets Improving the dielectric properties of polypropylene for metallised film capacitors based on cyclic olefin copolymer blending
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1