An enhanced sensorless control based on active disturbance rejection controller for a PMSM system: design and hardware implementation

Hao Lu, Shengquan Li, Bo Feng, Juan Li
{"title":"An enhanced sensorless control based on active disturbance rejection controller for a PMSM system: design and hardware implementation","authors":"Hao Lu, Shengquan Li, Bo Feng, Juan Li","doi":"10.1108/aa-01-2022-0016","DOIUrl":null,"url":null,"abstract":"<h3>Purpose</h3>\n<p>This paper mainly aims to deal with the problems of uncertainties including modelling errors, unknown dynamics and disturbances caused by load mutation in control of permanent magnet synchronous motor (PMSM).</p><!--/ Abstract__block -->\n<h3>Design/methodology/approach</h3>\n<p>This paper proposes an enhanced speed sensorless vector control method based on an active disturbance rejection controller (ADRC) for a PMSM. First, a state space model of the PMSM is obtained for the field orientation control strategy. Second, a sliding mode observer (SMO) based on back electromotive force (EMF) is introduced to replace the encode to estimate the rotor flux position angle and speed. Third, an infinite impulse response (IIR) filter is introduced to eliminate high frequency noise mixed in the output of the sliding mode observer. In addition, a speed control method based on an extended state observer (ESO) is proposed to estimate and compensate for the total disturbances. Finally, an experimental set-up is built to verify the effectiveness and superiority of the proposed ADRC-based control method.</p><!--/ Abstract__block -->\n<h3>Findings</h3>\n<p>The comparative experimental results show that the proposed speed sensorless control method with the IIR filter can achieve excellent robustness and speed tracking performance for PMSM system.</p><!--/ Abstract__block -->\n<h3>Research limitations/implications</h3>\n<p>An enhanced sensorless control method based on active disturbance rejection controller is designed to realize high precision control of the PMSM; the IIR filter is used to attenuate the chattering problem of traditional SMO; this method simplifies the system and saves the total cost due to the speed sensorless technology.</p><!--/ Abstract__block -->\n<h3>Practical implications</h3>\n<p>The use of sensorless can reduce costs and be more beneficial to actual industrial application.</p><!--/ Abstract__block -->\n<h3>Originality/value</h3>\n<p>The proposed enhanced speed sensorless vector control method based on an ADRC with the IIR filter enriches the control method of PMSM. It can ameliorate system robustness and achieve excellent speed tracking performance.</p><!--/ Abstract__block -->","PeriodicalId":501194,"journal":{"name":"Robotic Intelligence and Automation","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2022-05-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Robotic Intelligence and Automation","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1108/aa-01-2022-0016","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

Purpose

This paper mainly aims to deal with the problems of uncertainties including modelling errors, unknown dynamics and disturbances caused by load mutation in control of permanent magnet synchronous motor (PMSM).

Design/methodology/approach

This paper proposes an enhanced speed sensorless vector control method based on an active disturbance rejection controller (ADRC) for a PMSM. First, a state space model of the PMSM is obtained for the field orientation control strategy. Second, a sliding mode observer (SMO) based on back electromotive force (EMF) is introduced to replace the encode to estimate the rotor flux position angle and speed. Third, an infinite impulse response (IIR) filter is introduced to eliminate high frequency noise mixed in the output of the sliding mode observer. In addition, a speed control method based on an extended state observer (ESO) is proposed to estimate and compensate for the total disturbances. Finally, an experimental set-up is built to verify the effectiveness and superiority of the proposed ADRC-based control method.

Findings

The comparative experimental results show that the proposed speed sensorless control method with the IIR filter can achieve excellent robustness and speed tracking performance for PMSM system.

Research limitations/implications

An enhanced sensorless control method based on active disturbance rejection controller is designed to realize high precision control of the PMSM; the IIR filter is used to attenuate the chattering problem of traditional SMO; this method simplifies the system and saves the total cost due to the speed sensorless technology.

Practical implications

The use of sensorless can reduce costs and be more beneficial to actual industrial application.

Originality/value

The proposed enhanced speed sensorless vector control method based on an ADRC with the IIR filter enriches the control method of PMSM. It can ameliorate system robustness and achieve excellent speed tracking performance.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基于自抗扰控制器的永磁同步电机系统增强无传感器控制:设计与硬件实现
目的研究永磁同步电动机控制中存在的建模误差、动力学未知和负载突变引起的扰动等不确定性问题。本文提出了一种基于自抗扰控制器(ADRC)的永磁同步电机无速度传感器矢量控制方法。首先,建立了永磁同步电机磁场定向控制策略的状态空间模型。其次,引入基于反电动势(EMF)的滑模观测器(SMO)代替编码来估计转子磁链位置、角度和速度;第三,引入无限脉冲响应滤波器消除滑模观测器输出中的高频噪声。此外,提出了一种基于扩展状态观测器(ESO)的速度控制方法来估计和补偿总扰动。最后,通过实验验证了该控制方法的有效性和优越性。对比实验结果表明,采用IIR滤波器的无速度传感器控制方法对永磁同步电机系统具有良好的鲁棒性和速度跟踪性能。为实现永磁同步电机的高精度控制,设计了一种基于自抗扰控制器的增强型无传感器控制方法;采用IIR滤波器对传统SMO的抖振问题进行了衰减;由于采用了无速度传感器技术,该方法简化了系统,节省了总成本。实际意义使用无传感器可以降低成本,更有利于实际工业应用。提出了一种基于自抗扰和IIR滤波器的增强型无速度传感器矢量控制方法,丰富了永磁同步电机的控制方法。该方法可以提高系统的鲁棒性,实现良好的速度跟踪性能。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Indoor fixed-point hovering control for UAVs based on visual inertial SLAM Design and performance analysis of different cambered wings for flapping-wing aerial vehicles based on wind tunnel test A novel framework inspired by human behavior for peg-in-hole assembly Development of vision–based SLAM: from traditional methods to multimodal fusion An MS-TCN based spatiotemporal model with three-axis tactile for enhancing flexible printed circuit assembly
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1