The evaluation of grey relative incidence

Abstract

Purpose

With the use of the grey incidence analysis (GIA), indicators such as the absolute degree of grey incidence (ε_ij), relative degree of grey incidence (r_ij) or synthetic degree of grey incidence (ρ_ij) are calculated. However, it seems that some assumptions made to calculate them are arguable, which may also have a material impact on the reliability of test results. In this paper, the authors analyse one of the indicators of the GIA, namely the relative degree of grey incidence. The aim of the article was to verify the hypothesis: in determining the relative degree of grey incidence, the method of standardisation of elements in a series significantly affects the test results.

Design/methodology/approach

To achieve the purpose of the article, the authors used the numerical simulation method and the logical analysis method (in order to draw conclusions from our tests).

Findings

It turned out that the applied method of standardising elements in series when calculating the relative degree of grey incidence significantly affects the test results. Moreover, the manner of standardisation used in the original method (which involves dividing all elements by the first element) is not the best. Much more reliable results are obtained by a standardisation that involves dividing all elements by their arithmetic mean.

Research limitations/implications

Limitations of the conducted evaluation involve in particular the limited scope of inference. This is since the obtained results referred to only one of the indicators classified into the GIA.

Originality/value

In this article, the authors have evaluated the model of GIA in which the relative degree of grey incidence is determined. As a result of the research, the authors have proposed a recommendation regarding a change in the method of standardising variables, which will contribute to obtaining more reliable results in relational tests using the grey system theory.