Essential dynamic characterization of a historical bridge: integrated experimental and numerical investigations

IF 3.6 2区 工程技术 Q1 ENGINEERING, CIVIL Journal of Civil Structural Health Monitoring Pub Date : 2023-12-18 DOI:10.1007/s13349-023-00744-y
Sulyman Mansour, Fabio Rizzo, Nicola Ivan Giannoccaro, Armando La Scala, Maria Francesca Sabbà, Dora Foti
{"title":"Essential dynamic characterization of a historical bridge: integrated experimental and numerical investigations","authors":"Sulyman Mansour, Fabio Rizzo, Nicola Ivan Giannoccaro, Armando La Scala, Maria Francesca Sabbà, Dora Foti","doi":"10.1007/s13349-023-00744-y","DOIUrl":null,"url":null,"abstract":"<p>This paper reports on a series of experimental tests and a numerical study carried out on the historic masonry bridge of Santa Teresa of Bitonto, located in Bari (Southern Italy). A systematic working technique was planned and carried out with the final objective of defining the dynamic properties of the bridge and verifying the seismic repose by means of a response spectrum analysis. Initial stages were carried out including historical research, visual inspection, and geometric integrated aerial and ground survey on-site using UAV technique for the identification of the geometric details of the structural and non-structural elements of the bridge. An experimental campaign was scheduled and executed by performing free and forced-vibration tests using uniaxial and biaxial accelerometers placed at 22 monitoring points to retrieve the main vibration modes of the bridge with their corresponding frequencies and damping ratios. Although the free vibration tests detected only the main mode of vibration due to the squat nature of the structure, the forced-vibration tests help to confirm the findings and identify further modes of vibration. The consistency of the experimental frequencies was statistically confirmed by varying the conditions of the forced-vibration tests. A Finite-Element (FE) model was constructed and calibrated qualitatively (i.e., order of vibration modes) with respect to the experimental ones, based on both the geometric survey and the visual inspection outputs. Then, a second phase of calibration was undertaken by tuning the remaining free parameters to match the numerical values of all the detected modes. The calibrated model, capable of producing the experimental results, was adopted for performing a response spectrum analysis for the global response evaluation of the bridge. The results showed a globally acceptable level of stress, while excessive values were limitedly observed in a few critical zones.</p>","PeriodicalId":48582,"journal":{"name":"Journal of Civil Structural Health Monitoring","volume":"79 1","pages":""},"PeriodicalIF":3.6000,"publicationDate":"2023-12-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Civil Structural Health Monitoring","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1007/s13349-023-00744-y","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, CIVIL","Score":null,"Total":0}
引用次数: 0

Abstract

This paper reports on a series of experimental tests and a numerical study carried out on the historic masonry bridge of Santa Teresa of Bitonto, located in Bari (Southern Italy). A systematic working technique was planned and carried out with the final objective of defining the dynamic properties of the bridge and verifying the seismic repose by means of a response spectrum analysis. Initial stages were carried out including historical research, visual inspection, and geometric integrated aerial and ground survey on-site using UAV technique for the identification of the geometric details of the structural and non-structural elements of the bridge. An experimental campaign was scheduled and executed by performing free and forced-vibration tests using uniaxial and biaxial accelerometers placed at 22 monitoring points to retrieve the main vibration modes of the bridge with their corresponding frequencies and damping ratios. Although the free vibration tests detected only the main mode of vibration due to the squat nature of the structure, the forced-vibration tests help to confirm the findings and identify further modes of vibration. The consistency of the experimental frequencies was statistically confirmed by varying the conditions of the forced-vibration tests. A Finite-Element (FE) model was constructed and calibrated qualitatively (i.e., order of vibration modes) with respect to the experimental ones, based on both the geometric survey and the visual inspection outputs. Then, a second phase of calibration was undertaken by tuning the remaining free parameters to match the numerical values of all the detected modes. The calibrated model, capable of producing the experimental results, was adopted for performing a response spectrum analysis for the global response evaluation of the bridge. The results showed a globally acceptable level of stress, while excessive values were limitedly observed in a few critical zones.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
历史名桥的基本动态特性:综合实验和数值研究
本文报告了对位于意大利南部巴里的历史悠久的比通托圣特蕾莎砌石桥进行的一系列实验测试和数值研究。我们规划并实施了一项系统的工作技术,其最终目标是确定桥梁的动态特性,并通过反应谱分析验证地震重置。初期阶段的工作包括历史研究、目视检查以及使用无人机技术进行现场几何综合空中和地面勘测,以确定桥梁结构和非结构元素的几何细节。通过在 22 个监测点使用单轴和双轴加速度计进行自由振动和强迫振动测试,计划并实施了一项实验活动,以检索桥梁的主要振动模式及其相应的频率和阻尼比。虽然由于结构的下蹲性质,自由振动试验只检测到了主要振动模式,但强制振动试验有助于确认研究结果,并确定更多的振动模式。通过改变强制振动试验的条件,从统计学角度证实了试验频率的一致性。根据几何测量和目测结果,构建了有限元(FE)模型,并对实验模型进行了定性校准(即振动模式的顺序)。然后,进行第二阶段的校准,调整剩余的自由参数,使其与所有检测到的模态数值相匹配。校准后的模型能够生成实验结果,并被用于进行反应谱分析,以评估桥梁的整体反应。结果显示,应力水平总体上可以接受,而过大的应力值仅出现在少数关键区域。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Journal of Civil Structural Health Monitoring
Journal of Civil Structural Health Monitoring Engineering-Safety, Risk, Reliability and Quality
CiteScore
8.10
自引率
11.40%
发文量
105
期刊介绍: The Journal of Civil Structural Health Monitoring (JCSHM) publishes articles to advance the understanding and the application of health monitoring methods for the condition assessment and management of civil infrastructure systems. JCSHM serves as a focal point for sharing knowledge and experience in technologies impacting the discipline of Civionics and Civil Structural Health Monitoring, especially in terms of load capacity ratings and service life estimation.
期刊最新文献
Development and implementation of medium-fidelity physics-based model for hybrid digital twin-based damage identification of piping structures Innovated bridge health diagnosis model using bridge critical frequency ratio R–C–C fusion classifier for automatic damage detection of heritage building using 3D laser scanning An AIoT system for real-time monitoring and forecasting of railway temperature Environmental effects on the experimental modal parameters of masonry buildings: experiences from the Italian Seismic Observatory of Structures (OSS) network
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1