A comparative study on quantitative anatomical characteristics of compression, lateral, and opposite woods in Agathis loranthifolia and Pinus merkusii

IF 1.3 4区 农林科学 Q2 MATERIALS SCIENCE, PAPER & WOOD Bioresources Pub Date : 2023-12-13 DOI:10.15376/biores.19.1.925-943
B. Purusatama, Suk Woo Kim, Nam Hun Kim
{"title":"A comparative study on quantitative anatomical characteristics of compression, lateral, and opposite woods in Agathis loranthifolia and Pinus merkusii","authors":"B. Purusatama, Suk Woo Kim, Nam Hun Kim","doi":"10.15376/biores.19.1.925-943","DOIUrl":null,"url":null,"abstract":"Quantitative anatomical characteristics and their radial variation in compression (COW), lateral (LAW), and opposite (OPW) woods of Agathis loranthifolia and Pinus merkusii stem woods growing in Indonesia were observed and compared to understand wood quality. The length, diameter, wall thickness, and lumen diameter of tracheids and ray height and numbers were observed using optical microscopy. In both species, COW had the shortest tracheid length, smallest tracheid and lumen diameter, thickest cell wall, and highest ray numbers among the parts, while LAW and OPW showed comparable or variable values in quantitative characteristics. In A. loranthifolia, COW had the highest ray height, whereas, in P. merkusii, it had the lowest uniseriate and fusiform ray heights. No significant difference was observed in ray numbers and heights between LAW and OPW. In both species, the tracheid length and lumen-to-diameter ratio in COW, LAW, and OPW tended to increase from near the pith to near the bark while the wall-to-diameter ratio decreased. The ray heights of all parts increased with increasing distance from the pith, whereas the ray number decreased.","PeriodicalId":9172,"journal":{"name":"Bioresources","volume":"124 S176","pages":""},"PeriodicalIF":1.3000,"publicationDate":"2023-12-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bioresources","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.15376/biores.19.1.925-943","RegionNum":4,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, PAPER & WOOD","Score":null,"Total":0}
引用次数: 0

Abstract

Quantitative anatomical characteristics and their radial variation in compression (COW), lateral (LAW), and opposite (OPW) woods of Agathis loranthifolia and Pinus merkusii stem woods growing in Indonesia were observed and compared to understand wood quality. The length, diameter, wall thickness, and lumen diameter of tracheids and ray height and numbers were observed using optical microscopy. In both species, COW had the shortest tracheid length, smallest tracheid and lumen diameter, thickest cell wall, and highest ray numbers among the parts, while LAW and OPW showed comparable or variable values in quantitative characteristics. In A. loranthifolia, COW had the highest ray height, whereas, in P. merkusii, it had the lowest uniseriate and fusiform ray heights. No significant difference was observed in ray numbers and heights between LAW and OPW. In both species, the tracheid length and lumen-to-diameter ratio in COW, LAW, and OPW tended to increase from near the pith to near the bark while the wall-to-diameter ratio decreased. The ray heights of all parts increased with increasing distance from the pith, whereas the ray number decreased.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
罗汉松和欧洲赤松压缩木、侧向木和对生木定量解剖特征比较研究
观察并比较了生长在印度尼西亚的 Agathis loranthifolia 和 Pinus merkusii 茎木的压缩(COW)、侧向(LAW)和对生(OPW)解剖学定量特征及其径向变化,以了解木材质量。使用光学显微镜观察了气管的长度、直径、壁厚和管腔直径以及射线的高度和数量。在这两个物种中,COW的管胞长度最短,管胞和管腔直径最小,细胞壁最厚,射线数量最多,而LAW和OPW的数量特征值相当或不等。在 A. loranthifolia 中,COW 的射线高度最高,而在 P. merkusii 中,COW 的单列射线和纺锤形射线高度最低。LAW 和 OPW 的射线数量和高度没有明显差异。在这两个物种中,COW、LAW 和 OPW 的气管长度和管腔直径比从髓部附近到树皮附近呈上升趋势,而管壁直径比则下降。所有部分的射线高度都随着与髓部距离的增加而增加,而射线数量则有所减少。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Bioresources
Bioresources 工程技术-材料科学:纸与木材
CiteScore
2.90
自引率
13.30%
发文量
397
审稿时长
2.3 months
期刊介绍: The purpose of BioResources is to promote scientific discourse and to foster scientific developments related to sustainable manufacture involving lignocellulosic or woody biomass resources, including wood and agricultural residues. BioResources will focus on advances in science and technology. Emphasis will be placed on bioproducts, bioenergy, papermaking technology, wood products, new manufacturing materials, composite structures, and chemicals derived from lignocellulosic biomass.
期刊最新文献
Solid-state fermentation for gossypol detoxification and nutritive enrichment of cottonseed cake: A scale-up of batch fermentation process Crystallinity and chemical structure of Amazon wood species in a log yard after natural degradation Aquatic aerobic biodegradation of commonly flushed materials in aerobic wastewater treatment plant solids Mechanical and thermo-mechanical behaviors of snake grass fiber-reinforced epoxy composite Lignin-derived lithiophilic nitrogen-doped three-dimensional porous carbon as lithium growth guiding layers for lithium-metal batteries
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1