Determination of the sound absorption coefficient of ETFE cushions in-situ using the genetic material optimizer in Odeon®

Abstract

ETFE cushions are used as cladding in predominantly mid to large size architectural projects. Smaller cushions are about 10 m2 in size and the biggest single cushions can be several hundreds of square metres large. They are composed of ETFE membranes a few hundred of micrometres thick. From a point of view of room acoustics, their acoustic transparency, which increases with decreasing frequency, makes them to effectively act like sound absorbers. Their voluminous nature and transparency make it challenging to measure the sound absorption coefficient of ETFE cushions in a laboratory. Using the genetic material optimizer of Odeon® software, the effective sound absorption coefficient of ETFE cushions in four rooms was extracted from room acoustic parameters, which were in turn derived from measured room impulse response data. The results were compared and interpreted by the help of theoretical modelling and measurements on small cushions in a reverberant room. There is a relatively good agreement between the three types of results, possible causes for the differences are explained in the paper.