Generation of Plasma-Activated Fluids for Successful Disinfection of Pseudomonas aeruginosa in Liquid Environments and Determination of Microbial Damage

Plasma Pub Date : 2023-11-21 DOI:10.3390/plasma6040048
Mareike Hummert, Paul Leenders, Alexander Mellmann, Karsten Becker, Thorsten Kuczius
{"title":"Generation of Plasma-Activated Fluids for Successful Disinfection of Pseudomonas aeruginosa in Liquid Environments and Determination of Microbial Damage","authors":"Mareike Hummert, Paul Leenders, Alexander Mellmann, Karsten Becker, Thorsten Kuczius","doi":"10.3390/plasma6040048","DOIUrl":null,"url":null,"abstract":"The application of the non-thermal atmospheric pressure plasma technology is a promising tool for microbial inactivation. During the activation process, many reactive substances and radicals arise associated with physicochemical changes in the fluid and massive pH drop. In this study, we analyzed and optimized plasma activation settings and conditions of water and liquids to obtain inactivation of the waterborne microorganism Pseudomonas aeruginosa in a liquid environment. The minimal electrical output was 60 Watt with 20 min activation time followed by 30 min contact time with 108 cells/mL. Using higher electrical power (>90 W) with a Lab Unit generating plasma-activated water, a shorter activation time (<10 min) was sufficient for bacterial inactivation. The organic and inorganic composition of the activated liquid with different mineral salt concentrations is of utmost importance for the yield of reactive species during the plasma activation process and consequently for the antimicrobial effect. Plasma-activated fluids with high organic and inorganic contents demonstrated lower inactivation efficiencies than low loaded fluids; yet antimicrobial efficacy could be achieved by increasing the electrical power and activation time. For sufficient inactivation of bacterial suspensions, at least half a volume unit of plasma-activated water had to be added after appropriately optimized activation. Further dilutions reduced the antimicrobial effect. PAW lost activity after being left standing for a prolonged time after activation, so for maximizing the antimicrobial effect a direct use after activation is recommendable. Bacterial inactivation was shown by the absence of colony forming units on culture media and, at the molecular level, damage to the membrane and inactivation of enzymes were observed. Plasma-activated fluids demonstrated a high potential in applications as microbiological disinfectant in liquids.","PeriodicalId":509984,"journal":{"name":"Plasma","volume":"132 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-11-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Plasma","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3390/plasma6040048","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

The application of the non-thermal atmospheric pressure plasma technology is a promising tool for microbial inactivation. During the activation process, many reactive substances and radicals arise associated with physicochemical changes in the fluid and massive pH drop. In this study, we analyzed and optimized plasma activation settings and conditions of water and liquids to obtain inactivation of the waterborne microorganism Pseudomonas aeruginosa in a liquid environment. The minimal electrical output was 60 Watt with 20 min activation time followed by 30 min contact time with 108 cells/mL. Using higher electrical power (>90 W) with a Lab Unit generating plasma-activated water, a shorter activation time (<10 min) was sufficient for bacterial inactivation. The organic and inorganic composition of the activated liquid with different mineral salt concentrations is of utmost importance for the yield of reactive species during the plasma activation process and consequently for the antimicrobial effect. Plasma-activated fluids with high organic and inorganic contents demonstrated lower inactivation efficiencies than low loaded fluids; yet antimicrobial efficacy could be achieved by increasing the electrical power and activation time. For sufficient inactivation of bacterial suspensions, at least half a volume unit of plasma-activated water had to be added after appropriately optimized activation. Further dilutions reduced the antimicrobial effect. PAW lost activity after being left standing for a prolonged time after activation, so for maximizing the antimicrobial effect a direct use after activation is recommendable. Bacterial inactivation was shown by the absence of colony forming units on culture media and, at the molecular level, damage to the membrane and inactivation of enzymes were observed. Plasma-activated fluids demonstrated a high potential in applications as microbiological disinfectant in liquids.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
为成功消毒液体环境中的铜绿假单胞菌生成等离子激活液并确定微生物损伤情况
应用非热常压等离子体技术是一种很有前途的微生物灭活工具。在活化过程中,许多活性物质和自由基会随着液体的物理化学变化和 pH 值的大幅下降而产生。在这项研究中,我们分析并优化了水和液体的等离子活化设置和条件,以便在液体环境中灭活水生微生物铜绿假单胞菌。最小输出功率为 60 瓦,活化时间为 20 分钟,然后与 108 个细胞/毫升接触 30 分钟。使用实验室设备产生等离子活化水时,使用较高的功率(>90 瓦),较短的活化时间(<10 分钟)就足以灭活细菌。不同矿物盐浓度的活化液的有机和无机成分对等离子活化过程中活性物质的产生以及抗菌效果至关重要。有机物和无机物含量高的等离子活化液的灭活效率低于含量低的活化液;但抗菌效果可通过增加电功率和活化时间来实现。要充分灭活细菌悬浮液,必须在适当优化活化后加入至少半个体积单位的等离子活化水。进一步稀释会降低抗菌效果。PAW 在活化后长时间放置会失去活性,因此为了最大限度地提高抗菌效果,建议在活化后直接使用。细菌的失活表现在培养基上没有菌落形成单位,在分子水平上观察到膜受损和酶失活。等离子活化液体在作为液体微生物消毒剂方面具有很大的应用潜力。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
2.30
自引率
0.00%
发文量
0
期刊最新文献
Toroidal CO2 Plasma Sources with Low- and High-Frequency Power Coupling Configurations for Improved Energy Transfer Efficiencies A Review of Experimental Investigations into the Time Evolution of Low-Pressure Capacitively Coupled Plasmas in Their Early Stages of Development Analysis of ICRF Heating Schemes in ITER Non-Active Plasmas Using PION+ETS Integrated Modeling Advanced Diagnostics of Electrons Escaping from Laser-Produced Plasma Shock–Discharge Interaction Model Extended into the Third Dimension
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1