Using an automated tail movement sensor device to predict calving time in dairy cows

Abstract

This study aimed to evaluate the effectiveness of an automated tail movement sensor device (Moocall; Bluebell, Dublin, Ireland) to predict time of calving in dairy cows. At a commercial dairy farm in southern Ontario, Moocall (MC) devices were attached with the device's strap, and an additional elastic wrap, to the tail of cows approximately 3 d before their expected calving date. The MC has 2 types of alarm, a high activity alarm in the previous hour (1HA), and a high activity alarm in the previous 2 h (2HA); these alarms were sent and registered to the MC software. The calving and close-up pens were video monitored to determine the exact time of the onset of stage II of calving (amniotic sac visible at the vulva) and the end of stage II of calving (total expulsion of the calf). A total of 49 cows were enrolled, but we excluded 13 animals from the analysis as they had 3 or more MC drops from the tail (n = 6), a swollen tail (n = 3), or the MC device was lost (n = 4); this left 36 cows. In total, the device dropped off 21 (42%) cows. The average number of alarms (1HA and 2HA) per cow before stage II of calving was 2.7 ± 2.3 (± standard error). The first alarm after fitting the device on the tail was used to determine the device's sensitivity and specificity. Depending on the interval before the onset of parturition (i.e., 2, 4, 8, 12 h) in which the alarm was triggered, sensitivity varied from 5% to 72% and specificity from 50% to 93%. The false positive rate varied between 6% and 50% depending on the interval from the alarm to the onset of parturition. The high false positive and device drop rates (despite the addition of the elastic wrap) may compromise the applicability of this sensor device in a commercial setting.