Fenton-mediated solar-driven photocatalysis of industrial dye effluent with polyaniline impregnated with activated TiO2-Nps

Abstract

Various integrated technologies have been investigated for the remediation of heavily polluted industrial dye effluent. Also, more than 70 % of these dyes are known to be solely azo dyes used in the textile industry with 5–30 % presence in the effluent as loose dye molecules which are recalcitrant to treatment. These challenges led to the investigation of energy-efficient processes (solar) and the fabrication of high-performance nano-photocatalysts for proficient photocatalysis of dye effluent while mediating the process with Fenton reagents. The study fabricated nanopolymeric catalyst composites (P-AKT) via novel in situ coupling and impregnation of the polyaniline (PANI) with surface-activated TiO₂ NPs. This fabrication is aimed at developing a high-performance catalyst with rapid and proficient photocatalytic activities to photons from sunlight irradiation. The photocatalytic process was mediated using a novel Fenton reagent to enhance the generation of radical species for dye degradation. Various instrumental characterization methods were used to study the structural, molecular, elemental, functional and optoelectronic properties of the fabricated nanocomposite photocatalysts. The result reveals functional groups aiding dye-catalyst bonding and morphological interaction reveal a surface-activated tetragonal crystalline mixture of anatase and rutile from TiO₂⁻Nps embedded in the macromolecular chain of PANI. It also reveals the optimal conditions of 20 mg dosage, 10 mg/L initial concentration with substantial effectiveness at pH of 5 and 7. However, the most efficient photocatalyst recorded was P-AKT-2 % and P-AKT-3 % having 95 % and 94 % efficiencies at 90 min of solar irradiation. The photocatalyst equally demonstrated its capacity for effluent treatability up to 4 cycles of use.