Improving the Oxidation Behavior of CoCrFe2Ni0.5 High Entropy Alloy Through Powder-Pack Boriding

IF 2.1 3区 材料科学 Q2 METALLURGY & METALLURGICAL ENGINEERING Oxidation of Metals Pub Date : 2024-03-05 DOI:10.1007/s11085-024-10228-z
Yiğit Garip
{"title":"Improving the Oxidation Behavior of CoCrFe2Ni0.5 High Entropy Alloy Through Powder-Pack Boriding","authors":"Yiğit Garip","doi":"10.1007/s11085-024-10228-z","DOIUrl":null,"url":null,"abstract":"<div><p>The oxidation performance of CoCrFe<sub>2</sub>Ni<sub>0.5</sub> HEA borided through a powder-pack boriding process was investigated at 900 °C for 120 h. The boriding process at 900 °C for 6 h resulted in the formation of a two-zone structure: the outmost part contained a Ni<sub>2</sub>Si layer and the inner part consisted of a MB/M<sub>2</sub>B layer. The borided alloy displayed better oxidation resistance with the least oxidation rate constant value of 0.0383 (mg<sup>n</sup> cm<sup>−2n</sup> h<sup>−1</sup>). Moreover, this alloy rendered a continuous oxide layer that was denser, more compact, and contained fewer defects, which confirmed the improvement in oxidation resistance. The Ni<sub>2</sub>Si layer plus the boride layer was responsible for the enhanced oxidation performance of borided alloy.</p></div>","PeriodicalId":724,"journal":{"name":"Oxidation of Metals","volume":"101 3","pages":"549 - 571"},"PeriodicalIF":2.1000,"publicationDate":"2024-03-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s11085-024-10228-z.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Oxidation of Metals","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s11085-024-10228-z","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

Abstract

The oxidation performance of CoCrFe2Ni0.5 HEA borided through a powder-pack boriding process was investigated at 900 °C for 120 h. The boriding process at 900 °C for 6 h resulted in the formation of a two-zone structure: the outmost part contained a Ni2Si layer and the inner part consisted of a MB/M2B layer. The borided alloy displayed better oxidation resistance with the least oxidation rate constant value of 0.0383 (mgn cm−2n h−1). Moreover, this alloy rendered a continuous oxide layer that was denser, more compact, and contained fewer defects, which confirmed the improvement in oxidation resistance. The Ni2Si layer plus the boride layer was responsible for the enhanced oxidation performance of borided alloy.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
通过粉末包硼改善 CoCrFe2Ni0.5 高熵合金的氧化性能
在 900 °C、6 小时的硼化过程中形成了两区结构:最外层为 Ni2Si 层,内层为 MB/M2B 层。硼化合金具有更好的抗氧化性,其氧化速率常数最小值为 0.0383(mgn cm-2n h-1)。此外,这种合金形成的连续氧化层更致密、更紧凑、缺陷更少,这证实了其抗氧化性的提高。Ni2Si 层和硼化物层是硼化合金氧化性能增强的原因。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Oxidation of Metals
Oxidation of Metals 工程技术-冶金工程
CiteScore
5.10
自引率
9.10%
发文量
47
审稿时长
2.2 months
期刊介绍: Oxidation of Metals is the premier source for the rapid dissemination of current research on all aspects of the science of gas-solid reactions at temperatures greater than about 400˚C, with primary focus on the high-temperature corrosion of bulk and coated systems. This authoritative bi-monthly publishes original scientific papers on kinetics, mechanisms, studies of scales from structural and morphological viewpoints, transport properties in scales, phase-boundary reactions, and much more. Articles may discuss both theoretical and experimental work related to gas-solid reactions at the surface or near-surface of a material exposed to elevated temperatures, including reactions with oxygen, nitrogen, sulfur, carbon and halogens. In addition, Oxidation of Metals publishes the results of frontier research concerned with deposit-induced attack. Review papers and short technical notes are encouraged.
期刊最新文献
Segmentation and Metallographic Evaluation of Aluminium Slurry Coatings Using Machine Learning Techniques Editorial on Modeling, Prediction and Simulation Editorial on Oxidation in Complex Atmospheres Editorial on Oxidation of Novel Metallic Materials (Intermetallics, MMCs, HEAs…) Editorial on Coatings
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1