Numerical modeling of the fracturing mechanisms of unconsolidated sand reservoirs under water injection

Abstract

Produced Water Re-Injection is a standard practice in oil and gas operations. When performed at sufficiently high pressures, it can trigger the fracturing of the reservoir, which should be controlled to stimulate the formation without compromising its safety. While the mechanisms of the hydraulic fracturing of brittle rocks are well-understood, this understanding is more challenging in the case of unconsolidated sand reservoirs. Recent experimental studies indicate that pseudofractures in such formations primarily result from shear banding and flow channelization. There is a need for further interpretation of the experimental findings through numerical models that account for the proper physical phenomena. For that, a coupled finite element model of water percolation, particle transport and strain localization is developed to replicate the experiments of radial injection of water in mixtures of sand and fines by Nguyen et al., 2022: An experimental setup with radial injection cell for investigation of fracturing in unconsolidated sand reservoirs under fluid injection. Journal of Petroleum Science and Engineering 213:11036. To simulate shear banding, the model accounts for strain-softening behavior and introduces material imperfections in a few weak elements. Particle mobilization starts once a critical fluid velocity is reached and permeability is assumed to be a function of particle concentration. The numerical models can replicate the geometry of the observed radial pseudofractures, as well as the measured fracturing pressures. They also qualitatively capture the effects of the initial stress state on the fracturing pressure, the fracture length and on the permeability increases during the fracturing regime as observed in the laboratory tests. Notably, the numerical results gave hints on the role of the coupling between strain localization and particle transport on the formation of the pseudofractures. These findings are used to propose an updated conceptual model for the hydraulic fracturing of sand packs.