Modeling the Gas Permeability of the Powder Bed in a Rotary Furnace

Abstract

Rotary furnaces are used as reactors to intensify chemical processes between the powder and gas atmosphere around it. The furnace rotation leads to relative motion and dilation of the powder layers, facilitating gas access. The paper is devoted to the modeling of nickel oxide powder behavior in a rotary furnace to estimate the contribution of furnace rotation speed to gas permeability when the nickel oxide granules are reduced in a hydrogen atmosphere. Discrete element modeling of powder granules in a rotary furnace was conducted employing Altair EDEM commercial software to estimate the powder gas permeability at different stages. The powder bed in a horizontal cylindrical rotary furnace was modeled as a packing of identical spherical granules with diameters equal to those of the nickel oxide granules. The furnace rotation led to periodic oscillations of the powder along the furnace wall with an amplitude that gradually diminished to some steady value. Gas permeability of the powder bed was evaluated through the porosity function, derived from the Carman permeability equations. Greater gas permeability resulting from significant powder dilation was observed only in active shear zones on the powder bed surface and in the contact area between the powder and the furnace wall. Sizes of the shear zones depended on the furnace rotation speed but never exceeded several granule diameters for all rotation speeds. The efficiency of a rotary furnace as a chemical reactor was shown to be determined not only by the powder dilation but also by the regeneration rate for the powder bed surface. The regeneration rate can be calculated and changes nonlinearly with the furnace rotation speed.