Influence of Phase Composition and Aging on Hydrogen Brittleness of High-Pressure Pipelines

Q4 Materials Science Steel in Translation Pub Date : 2024-03-21 DOI:10.3103/s0967091223700080
S. V. Kuberskii, S. A. Sbitnev, R. E. Velikotskii, V. V. Dolzhkov
{"title":"Influence of Phase Composition and Aging on Hydrogen Brittleness of High-Pressure Pipelines","authors":"S. V. Kuberskii, S. A. Sbitnev, R. E. Velikotskii, V. V. Dolzhkov","doi":"10.3103/s0967091223700080","DOIUrl":null,"url":null,"abstract":"<h3 data-test=\"abstract-sub-heading\">Abstract</h3><p>It is shown on the basis of developing hydrogen brittleness ideas that this parameter is influenced mainly by flawed cavities formed at the ferrite-cementite phase boundary and not by crystal lattice defects and other discontinuities of metal. The influence of antiflaking heat treatment (AFHT) on hydrogen flawed cavity formation is established as well as nonlinear changes in cold resistance at the aging of metal not exposed to AFHT. The influence of microstructural and phase composition and phase formation pattern on the cold resistance of steel is considered. The most pronounced negative effect on cold resistance is produced by all the phases formed by shearing. The influence of the final temperature of the finishing rolling stage on cold resistance is substantiated depending on the critical temperature interval.</p>","PeriodicalId":21903,"journal":{"name":"Steel in Translation","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2024-03-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Steel in Translation","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3103/s0967091223700080","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Materials Science","Score":null,"Total":0}
引用次数: 0

Abstract

It is shown on the basis of developing hydrogen brittleness ideas that this parameter is influenced mainly by flawed cavities formed at the ferrite-cementite phase boundary and not by crystal lattice defects and other discontinuities of metal. The influence of antiflaking heat treatment (AFHT) on hydrogen flawed cavity formation is established as well as nonlinear changes in cold resistance at the aging of metal not exposed to AFHT. The influence of microstructural and phase composition and phase formation pattern on the cold resistance of steel is considered. The most pronounced negative effect on cold resistance is produced by all the phases formed by shearing. The influence of the final temperature of the finishing rolling stage on cold resistance is substantiated depending on the critical temperature interval.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
相组成和老化对高压管道氢脆性的影响
摘要 根据氢脆的发展思想,氢脆参数主要受铁素体-方解石相界形成的缺陷空穴影响,而不受金属晶格缺陷和其他不连续性的影响。研究确定了抗剥落热处理(AFHT)对氢缺陷空穴形成的影响,以及未暴露于 AFHT 的金属在老化过程中耐寒性的非线性变化。研究还考虑了微结构和相组成以及相形成模式对钢耐寒性的影响。剪切形成的所有相对耐寒性的负面影响最为明显。精轧阶段的最终温度对耐寒性的影响取决于临界温度区间。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Steel in Translation
Steel in Translation Materials Science-Materials Science (all)
CiteScore
0.60
自引率
0.00%
发文量
81
期刊介绍: Steel in Translation  is a journal that represents a selection of translated articles from two Russian metallurgical journals: Stal’  and Izvestiya Vysshikh Uchebnykh Zavedenii. Chernaya Metallurgiya . Steel in Translation  covers new developments in blast furnaces, steelmaking, rolled products, tubes, and metal manufacturing as well as unconventional methods of metallurgy and conservation of resources. Papers in materials science and relevant commercial applications make up a considerable portion of the journal’s contents. There is an emphasis on metal quality and cost effectiveness of metal production and treatment.
期刊最新文献
Formation of Cracks during Thermal Treatment of Martensite-Bainite Steel Parts Methods of Increasing the Strength of Metals and Their Impact on Operational Reliability Algorithm for Processing Microphotographs of Thin Sections during Scanning Electron Microscopy From Industry 4.0 to Industry 5.0: Problems and Opportunities for the Metal Industry Development in Russia Influence of Physical and Chemical Sintering Processes on the Quality of a Sinter
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1