Parameterization of nutrients and sediment build-up/wash-off processes for simulating stormwater quality from specific land uses

Abstract

Urbanization changes land cover through the expansion of impermeable surfaces, leading to a significant rise in runoff, sediment, and nutrient loading. The quality of stormwater is related to land use and is highly variable. Currently, stormwater is predominantly described through watershed models that rely minimally, if at all, on field monitoring data. The simple event mean concentration (EMC) wash-off approach by land use is a common method for estimating urban runoff loads. However, a major drawback of the EMC approach is it assumes concentration remains constant across events for a specific land use. Build-up/wash-off equations have been formulated to consider variations in concentration between events. However, several equation parameters are challenging to estimate, making them difficult to use. We conducted a monitoring and modeling study and investigated the impact of land use on stormwater quantity and quality and optimized and investigated the build-up/wash-off parameters for three homogenous urban land uses to estimate nutrients (nitrogen and phosphorus) and sediment loads. Stormwater from commercial, medium-density residential, and transportation land uses was sampled using automatic samplers during storm events, and water quality was characterized for a variety of them for 14 months. Analysis of stormwater samples included assessments for total nitrogen, total phosphorus, and total suspended solids. Results showed that medium-density residential land use had the highest median total nitrogen and total phosphorus event mean concentrations and commercial had the highest median total suspended solids EMCs. Water quality parameters (or build-up/wash-off parameters) exhibited significant variation between land uses, confirming that land use is a key determinant of stormwater quality. The median particle size for each land use was less than 150 μm, indicating that the most common particle size in stormwater was a very fine sand or smaller. This small size should be considered by stakeholders in the design of stormwater treatment systems.