Fault-tolerant control of current residual vector three-phase four-switch motor drive system based on MLD model

IF 1.9 4区 工程技术 Q3 ENGINEERING, ELECTRICAL & ELECTRONIC IET Power Electronics Pub Date : 2024-04-04 DOI:10.1049/pel2.12688
Dezhi Chen, Wenbo Zhao, Yun Sun, Wenliang Zhao, Zhixiang Zhang, Ziyuan Xin
{"title":"Fault-tolerant control of current residual vector three-phase four-switch motor drive system based on MLD model","authors":"Dezhi Chen,&nbsp;Wenbo Zhao,&nbsp;Yun Sun,&nbsp;Wenliang Zhao,&nbsp;Zhixiang Zhang,&nbsp;Ziyuan Xin","doi":"10.1049/pel2.12688","DOIUrl":null,"url":null,"abstract":"<p>Aiming at the problem of single-phase switch tube open circuit fault in inverters, a current residual vector three-phase four-switch fault-tolerant control strategy based on the mixed logic dynamic (MLD) model of permanent magnet synchronous motor (PMSM) drive system is proposed. Firstly, the MLD and three-phase four-switch mathematical models of the motor drive system are established and a calculation method of DC bus capacitance is proposed. Secondly, to improve the dynamic performance of the motor, an improved vector control based on the MLD model is proposed. Finally, by setting the threshold and dividing the area of the current residual vector, the accuracy of inverter fault diagnosis is improved, and the fast and smooth switching of the drive system after the fault is realized. Simulation and experimental results show that this strategy can effectively reduce the influence of calculation error and system noise, and has strong robustness for the change of motor speed and load.</p>","PeriodicalId":56302,"journal":{"name":"IET Power Electronics","volume":"17 6","pages":"731-751"},"PeriodicalIF":1.9000,"publicationDate":"2024-04-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://onlinelibrary.wiley.com/doi/epdf/10.1049/pel2.12688","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"IET Power Electronics","FirstCategoryId":"5","ListUrlMain":"https://ietresearch.onlinelibrary.wiley.com/doi/10.1049/pel2.12688","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0

Abstract

Aiming at the problem of single-phase switch tube open circuit fault in inverters, a current residual vector three-phase four-switch fault-tolerant control strategy based on the mixed logic dynamic (MLD) model of permanent magnet synchronous motor (PMSM) drive system is proposed. Firstly, the MLD and three-phase four-switch mathematical models of the motor drive system are established and a calculation method of DC bus capacitance is proposed. Secondly, to improve the dynamic performance of the motor, an improved vector control based on the MLD model is proposed. Finally, by setting the threshold and dividing the area of the current residual vector, the accuracy of inverter fault diagnosis is improved, and the fast and smooth switching of the drive system after the fault is realized. Simulation and experimental results show that this strategy can effectively reduce the influence of calculation error and system noise, and has strong robustness for the change of motor speed and load.

Abstract Image

Abstract Image

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
基于 MLD 模型的电流残差矢量三相四开关电机驱动系统容错控制
针对逆变器单相开关管开路故障问题,提出了一种基于永磁同步电机(PMSM)驱动系统混合逻辑动态(MLD)模型的电流残差矢量三相四开关容错控制策略。首先,建立了电机驱动系统的 MLD 和三相四开关数学模型,并提出了直流母线电容的计算方法。其次,为改善电机的动态性能,提出了基于 MLD 模型的改进型矢量控制。最后,通过设置阈值和划分电流残差矢量的区域,提高了变频器故障诊断的准确性,实现了故障后驱动系统的快速平滑切换。仿真和实验结果表明,该策略能有效降低计算误差和系统噪声的影响,对电机转速和负载的变化具有很强的鲁棒性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
IET Power Electronics
IET Power Electronics ENGINEERING, ELECTRICAL & ELECTRONIC-
CiteScore
5.50
自引率
10.00%
发文量
195
审稿时长
5.1 months
期刊介绍: IET Power Electronics aims to attract original research papers, short communications, review articles and power electronics related educational studies. The scope covers applications and technologies in the field of power electronics with special focus on cost-effective, efficient, power dense, environmental friendly and robust solutions, which includes: Applications: Electric drives/generators, renewable energy, industrial and consumable applications (including lighting, welding, heating, sub-sea applications, drilling and others), medical and military apparatus, utility applications, transport and space application, energy harvesting, telecommunications, energy storage management systems, home appliances. Technologies: Circuits: all type of converter topologies for low and high power applications including but not limited to: inverter, rectifier, dc/dc converter, power supplies, UPS, ac/ac converter, resonant converter, high frequency converter, hybrid converter, multilevel converter, power factor correction circuits and other advanced topologies. Components and Materials: switching devices and their control, inductors, sensors, transformers, capacitors, resistors, thermal management, filters, fuses and protection elements and other novel low-cost efficient components/materials. Control: techniques for controlling, analysing, modelling and/or simulation of power electronics circuits and complete power electronics systems. Design/Manufacturing/Testing: new multi-domain modelling, assembling and packaging technologies, advanced testing techniques. Environmental Impact: Electromagnetic Interference (EMI) reduction techniques, Electromagnetic Compatibility (EMC), limiting acoustic noise and vibration, recycling techniques, use of non-rare material. Education: teaching methods, programme and course design, use of technology in power electronics teaching, virtual laboratory and e-learning and fields within the scope of interest. Special Issues. Current Call for papers: Harmonic Mitigation Techniques and Grid Robustness in Power Electronic-Based Power Systems - https://digital-library.theiet.org/files/IET_PEL_CFP_HMTGRPEPS.pdf
期刊最新文献
Fault Detection and Diagnosis for Multi-Faults of PMSM-Drive Systems Using a Hybrid Machine Learning Method Coordinated Control of Grid-Forming and Grid-Following Inverters With Enhanced Dynamic Performance Parameter-Adaptive Control Method in Left-Side Power Point Tracking Mode for Single-Stage Photovoltaic Power Generation Systems A Damping-Reuse-Based Inverter Topology Reconfiguration Method for Wideband Resonance Suppression Active Power Filter-Based Low-Frequency Ripple Power Suppression of the DC-Link in Railway Traction Systems
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1