Rolling Eccentric Steel Rings on an Industrial Radial–Axial Ring Rolling Mill

Abstract

Various industries, including mechanical engineering, utilize steel rings featuring variable cross-sectional profiles, such as eccentric rings. Presently employed methods for producing eccentric rings possess drawbacks like restricted geometries, significant material wastage or uneven microstructures. The radial–axial ring rolling process serves to create seamless rolled steel rings with near-net-shaped cross-sections. A novel technique involves achieving eccentricity by dynamically adjusting the mandrel’s position during the ring rolling process. This method’s fundamental feasibility has previously been showcased using a blend of oil clay and a labor test bench. Transferring the possibility of manufacturing eccentric rings on industrial radial–axial ring rolling mills would expand the product range of ring manufacturers without encountering drawbacks associated with existing manufacturing processes. The objective of this paper is to demonstrate the basic feasibility of the concept of an industrial radial–axial ring rolling mill. In the first step, FEA simulation studies were carried out to develop the rolling strategy and estimate the achievable eccentricity on the institute’s radial–axial ring mill. Subsequently, the rolling strategy was implemented on an industrial ring rolling mill with the help of a unique technology module programmed in C++. Finally, an eccentric ring was ring rolled and compared with the FEA simulation, and the reproducibility was demonstrated to be successful.