The effect of PVP and PVA on hydrate formation kinetics of ethane and propane mixture in the presence of kaolin nanoparticles

IF 1.6 4区 工程技术 Q3 ENGINEERING, CHEMICAL Canadian Journal of Chemical Engineering Pub Date : 2024-05-16 DOI:10.1002/cjce.25305
J. Kiani, P. Gholami, F. Makenali, M. Bahrami
{"title":"The effect of PVP and PVA on hydrate formation kinetics of ethane and propane mixture in the presence of kaolin nanoparticles","authors":"J. Kiani,&nbsp;P. Gholami,&nbsp;F. Makenali,&nbsp;M. Bahrami","doi":"10.1002/cjce.25305","DOIUrl":null,"url":null,"abstract":"<p>The blockage of gas transmission pipelines due to gas hydrates poses a significant challenge for the gas industry. Low-dosage hydrate inhibitors (LDHI) are utilized to influence the kinetics of hydrate formation, including nucleation, growth, and/or agglomeration. In the current study, a series of batch, isochoric, and isothermal tests were carried out to investigate the impacts of two LDHIs, poly N-vinylpyrrolidone (PVP) and polyvinyl alcohols (PVA). This study examined the influence of these inhibitors on nucleation and growth of ethane+propane mixture in the presence of kaolin nanoparticles. In laboratory studies and using pure constituents, the rate of hydrate formation is low to investigate the inhibitors effect. To enhance the rate of hydrate formation, kaolin nanoparticles were utilized as they serve as a suitable representative for solid minerals commonly found in pipelines. The gas phase's compositional change were measured using a gas chromatograph. The results revealed that the growth stage of mixed-gas exhibited two distinct steps, attributed to the formation of two different structures known as structure II and structure I. During the first step, structure II was formed, and the cavities were occupied by both gas components. In the second stage, structure I was formed by ethane. The effect of temperature on the induction time (nucleation rate) and the growth rate during the second stage was lower than that at the first stage. The increase in PVA concentration resulted in an increase in the induction time and a decrease in the rate of growth during the first stage. The performance of PVA was found to be affected by temperature. Lower temperatures resulted in the formation of less foam, providing improved performance for PVA at −0.5°C. PVP had a stronger impact on induction time and both growth steps compared to PVA, indicating stronger inhibitory impact of PVP on nucleation of hydrates initiated by propane and the growth of both propane and ethane hydrates.</p>","PeriodicalId":9400,"journal":{"name":"Canadian Journal of Chemical Engineering","volume":"102 11","pages":"3994-4006"},"PeriodicalIF":1.6000,"publicationDate":"2024-05-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Canadian Journal of Chemical Engineering","FirstCategoryId":"5","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1002/cjce.25305","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

Abstract

The blockage of gas transmission pipelines due to gas hydrates poses a significant challenge for the gas industry. Low-dosage hydrate inhibitors (LDHI) are utilized to influence the kinetics of hydrate formation, including nucleation, growth, and/or agglomeration. In the current study, a series of batch, isochoric, and isothermal tests were carried out to investigate the impacts of two LDHIs, poly N-vinylpyrrolidone (PVP) and polyvinyl alcohols (PVA). This study examined the influence of these inhibitors on nucleation and growth of ethane+propane mixture in the presence of kaolin nanoparticles. In laboratory studies and using pure constituents, the rate of hydrate formation is low to investigate the inhibitors effect. To enhance the rate of hydrate formation, kaolin nanoparticles were utilized as they serve as a suitable representative for solid minerals commonly found in pipelines. The gas phase's compositional change were measured using a gas chromatograph. The results revealed that the growth stage of mixed-gas exhibited two distinct steps, attributed to the formation of two different structures known as structure II and structure I. During the first step, structure II was formed, and the cavities were occupied by both gas components. In the second stage, structure I was formed by ethane. The effect of temperature on the induction time (nucleation rate) and the growth rate during the second stage was lower than that at the first stage. The increase in PVA concentration resulted in an increase in the induction time and a decrease in the rate of growth during the first stage. The performance of PVA was found to be affected by temperature. Lower temperatures resulted in the formation of less foam, providing improved performance for PVA at −0.5°C. PVP had a stronger impact on induction time and both growth steps compared to PVA, indicating stronger inhibitory impact of PVP on nucleation of hydrates initiated by propane and the growth of both propane and ethane hydrates.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
高岭土纳米颗粒存在下 PVP 和 PVA 对乙烷和丙烷混合物水合物形成动力学的影响
天然气水合物导致输气管道堵塞是天然气行业面临的一项重大挑战。低剂量水合物抑制剂 (LDHI) 可用于影响水合物形成的动力学,包括成核、生长和/或聚集。在本研究中,我们进行了一系列间歇、等速和等温试验,以研究聚 N-乙烯基吡咯烷酮 (PVP) 和聚乙烯醇 (PVA) 这两种低剂量水合物抑制剂的影响。本研究考察了这些抑制剂在高岭土纳米颗粒存在的情况下对乙烷+丙烷混合物成核和生长的影响。在实验室研究和使用纯成分时,水合物的形成速率较低,因此无法研究抑制剂的影响。为了提高水合物的形成速度,我们使用了纳米高岭土颗粒,因为它们是管道中常见的固体矿物的合适代表。使用气相色谱仪测量了气相的成分变化。结果表明,混合气体的生长阶段有两个不同的步骤,形成了两种不同的结构,即结构 II 和结构 I。在第二阶段,乙烷形成了结构 I。在第二阶段,温度对诱导时间(成核率)和生长率的影响低于第一阶段。PVA 浓度的增加导致第一阶段诱导时间的增加和生长率的降低。研究发现,PVA 的性能受温度影响。温度越低,形成的泡沫越少,从而提高了 PVA 在 -0.5°C 时的性能。与 PVA 相比,PVP 对诱导时间和两个生长步骤的影响更大,这表明 PVP 对丙烷引发的水合物成核以及丙烷和乙烷水合物的生长有更强的抑制作用。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Canadian Journal of Chemical Engineering
Canadian Journal of Chemical Engineering 工程技术-工程:化工
CiteScore
3.60
自引率
14.30%
发文量
448
审稿时长
3.2 months
期刊介绍: The Canadian Journal of Chemical Engineering (CJChE) publishes original research articles, new theoretical interpretation or experimental findings and critical reviews in the science or industrial practice of chemical and biochemical processes. Preference is given to papers having a clearly indicated scope and applicability in any of the following areas: Fluid mechanics, heat and mass transfer, multiphase flows, separations processes, thermodynamics, process systems engineering, reactors and reaction kinetics, catalysis, interfacial phenomena, electrochemical phenomena, bioengineering, minerals processing and natural products and environmental and energy engineering. Papers that merely describe or present a conventional or routine analysis of existing processes will not be considered.
期刊最新文献
Issue Information Issue Highlights Issue Information Issue Highlights Issue Information
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1