Multi-Strategical Thermal Management Approach for Lithium-Ion Batteries: Combining Forced Convection, Mist Cooling, Air Flow Improvisers and Additives

Abstract

Maintaining the peak temperature of a battery within limits is a mandate for the safer operation of electric vehicles. In two-wheeler electric vehicles, the options available for the battery thermal management system are minuscule due to the restrictions imposed by factors like weight, cost, availability, performance, and load. In this study, a multi-strategical cooling approach of forced convection and mist cooling over a single-cell 21,700 lithium-ion battery working under the condition of 4C is proposed. The chosen levels for air velocities (10, 15, 20 and 25 m/s) imitate real-world riding conditions, and for mist cooling implementation, injection pressure with three levels (3, 7 and 14 bar) is considered. The ANSYS fluent simulation is carried out using the volume of fluid in the discrete phase modelling transition using water mist as a working fluid. Initial breakup is considered for more accurate calculations. The battery’s state of health (SOH) is determined using PYTHON by adopting the Newton–Raphson estimation. The maximum temperature reduction potential by employing an airflow improviser (AFI) and additives (Tween 80, 1-heptanol, APG0810, Tween 20 and FS3100) is also explored. The simulation results revealed that an additional reduction of about 11% was possible by incorporating additives and AFI in the multi-strategical approach. The corresponding SOH improvement was about 2%. When the electric two-wheeler operated under 4C, the optimal condition (Max. SOH and Min. peak cell temp.) was achieved at an air velocity of 25 m/s, injection pressure of 7 bar with AFI and 3% (by wt.) Tween 80 and a 0.1% deformer.