Scaling to practical pouch cell supercapacitor: Electrodes by electrophoretic deposition

Barun K. Chakrabarti , Chee Tong John Low
{"title":"Scaling to practical pouch cell supercapacitor: Electrodes by electrophoretic deposition","authors":"Barun K. Chakrabarti ,&nbsp;Chee Tong John Low","doi":"10.1016/j.nxener.2024.100137","DOIUrl":null,"url":null,"abstract":"<div><p>The scale-up of supercapacitors by electrophoretic deposition (EPD) from coin cell to pouch cell with commercially relevant mass loadings and thicknesses is reported. The use of EPD in electrode fabrication mainly reduces the interfacial resistance and increases the mechanical flexibility of the electrodes. The cycling performance or conversion efficiency can also be improved due to the highly porous EPD coatings. An exemplary investigation of activated carbon (AC) electrodes with an electrolyte comprising of tetraethylammonium tetrafluoroborate in acetonitrile is carried out. According to the general literature, EPD of AC on metal substrates has not performed well for supercapacitor electrodes unless they were thinner and with lower mass loadings than commercial requirements. As a consequence, and to redress this research gap, all the electrodes prepared in this work demonstrate high mass loadings (8 mg cm<sup>−2</sup>) and practical layer thicknesses (125 µm) and contain polyvinylidene fluoride binders with electrically conductive carbon black particles. Research investigations include: (a) impact of EPD of AC onto small (10 cm<sup>2</sup>) and large areas (50 cm<sup>2</sup>) of aluminum foil current collectors, (b) scaling-up of coin to pouch cells, and (c) the preparation of electrode coatings on both sides of the current collector for the first time using EPD for pouch cell investigations. Our research learning shows the evidence of practical cell performance, including current loading (40 A g<sup>−1</sup>), tens of thousands of successive charge and discharge operation (150,000 cycles), power (30 kW kg<sup>−1</sup>) and energy densities (10 W h kg<sup>−1</sup>), capacitance (154 F g<sup>−1</sup>), capacitance retention (80%) and coulombic efficiency (relatively close to 100%). Based upon the success of the pouch cells investigated in this work, further research studies on the use of EPD for preparing energy storage electrodes for commercial cylindrical types of supercapacitors is envisaged.</p></div>","PeriodicalId":100957,"journal":{"name":"Next Energy","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2024-05-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S2949821X24000425/pdfft?md5=21226b68b227150aeca99de1759f10e9&pid=1-s2.0-S2949821X24000425-main.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Next Energy","FirstCategoryId":"1085","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2949821X24000425","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

The scale-up of supercapacitors by electrophoretic deposition (EPD) from coin cell to pouch cell with commercially relevant mass loadings and thicknesses is reported. The use of EPD in electrode fabrication mainly reduces the interfacial resistance and increases the mechanical flexibility of the electrodes. The cycling performance or conversion efficiency can also be improved due to the highly porous EPD coatings. An exemplary investigation of activated carbon (AC) electrodes with an electrolyte comprising of tetraethylammonium tetrafluoroborate in acetonitrile is carried out. According to the general literature, EPD of AC on metal substrates has not performed well for supercapacitor electrodes unless they were thinner and with lower mass loadings than commercial requirements. As a consequence, and to redress this research gap, all the electrodes prepared in this work demonstrate high mass loadings (8 mg cm−2) and practical layer thicknesses (125 µm) and contain polyvinylidene fluoride binders with electrically conductive carbon black particles. Research investigations include: (a) impact of EPD of AC onto small (10 cm2) and large areas (50 cm2) of aluminum foil current collectors, (b) scaling-up of coin to pouch cells, and (c) the preparation of electrode coatings on both sides of the current collector for the first time using EPD for pouch cell investigations. Our research learning shows the evidence of practical cell performance, including current loading (40 A g−1), tens of thousands of successive charge and discharge operation (150,000 cycles), power (30 kW kg−1) and energy densities (10 W h kg−1), capacitance (154 F g−1), capacitance retention (80%) and coulombic efficiency (relatively close to 100%). Based upon the success of the pouch cells investigated in this work, further research studies on the use of EPD for preparing energy storage electrodes for commercial cylindrical types of supercapacitors is envisaged.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
扩展到实用的袋式电池超级电容器:电泳沉积电极
报告介绍了通过电泳沉积(EPD)技术将超级电容器从硬币电池放大到具有商业相关质量负载和厚度的袋式电池。在电极制造中使用电泳沉积主要是为了降低界面电阻和增加电极的机械灵活性。高多孔性 EPD 涂层还能提高循环性能或转换效率。本研究对活性炭(AC)电极与乙腈中的四氟硼酸四乙基铵电解液进行了示范性研究。根据一般文献,金属基底上的活性炭 EPD 在超级电容器电极方面表现不佳,除非它们比商业要求的更薄、质量负荷更低。因此,为了弥补这一研究空白,本研究中制备的所有电极都具有较高的质量负荷(8 毫克厘米-2)和实用的层厚(125 微米),并含有聚偏氟乙烯粘合剂和导电炭黑颗粒。研究调查包括(a) 交流电的 EPD 对小面积(10 平方厘米)和大面积(50 平方厘米)铝箔集流器的影响,(b) 将硬币放大到袋式电池,以及 (c) 首次使用 EPD 制备集流器两侧的电极涂层,用于袋式电池研究。我们的研究成果证明了电池的实用性能,包括电流负载(40 A g-1)、数万次连续充放电操作(150,000 次)、功率(30 kW kg-1)和能量密度(10 W h kg-1)、电容(154 F g-1)、电容保持率(80%)和库仑效率(相对接近 100%)。基于这项工作中研究的袋式电池的成功,预计将进一步研究使用 EPD 制备商业圆柱型超级电容器的储能电极。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Dry reforming of methane and interaction between NiO and CeZrPrOx oxide in different crystallographic plane Hierarchical control of inverter-based microgrid with droop approach and proportional-integral controller Assessment of Iron(III) chloride as a catalyst for the production of hydrogen from the supercritical water gasification of microalgae In situ growth of 3D nano-array architecture Bi2S3/nickel foam assembled by interwoven nanosheets electrodes for hybrid supercapacitor Reducing resistances of all-solid-state polymer batteries via hot-press activation
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1