3D printed needleless injector based on thermocavitation: analysis of impact and penetration depth in skin phantoms in a repetitive regime.

Abstract

A global issue that requires attention is the duality between the shortage of needles for regular vaccination campaigns and the exponential increase in syringe and needle waste from such campaigns, which has been exacerbated by the COVID-19 pandemic. In response to this problem, this study presents a 3D printed needleless injector based on thermocavitation. The work focused on investigating the interaction of the resulting liquid jets with skin phantoms at different concentrations (1-2%), emphasizing their impact and penetration depth in a repetitive regime. The injector was designed and fabricated from a semi-transparent polymer using a high-resolution 3D printer, allowing the ejection of liquid jets with velocities up to ~ 73 m/s. The impact of these jets on skin phantoms was evaluated using a high-speed camera. After 6 consecutive liquid jets (1% concentration), a maximum penetration depth of ~ 2.5 mm was achieved, delivering approximately 4.7 µL. For the highest concentration (2.0%) and the same number of shots, the penetration depth was reduced to ~ 0.6 mm with a delivered volume of ~ 0.7 µL. An important finding of this study is that the liquid jet with the highest pressure does not cause the maximum penetration depth, but is the result of a series of successive shots. In addition, the velocity and shape of the ejected jet are determined by the amount of solution and the meniscus formed inside the injector. These findings advance the development of precise and efficient thermocavitation-based injectors with broad potential applications in medical and pharmaceutical fields.