Hydrogenation of Furfural over Ruthenium Catalysts Supported on Porous Aromatic Frameworks

IF 1.3 4区 工程技术 Q3 CHEMISTRY, ORGANIC Petroleum Chemistry Pub Date : 2024-06-14 DOI:10.1134/S0965544124020191
L. A. Kulikov, D. A. Makeeva, A. M. Dubiniak, M. V. Terenina, Yu. S. Kardasheva, S. V. Egazar’yants, A. F. Bikbaeva, A. L. Maximov, E. A. Karakhanov
{"title":"Hydrogenation of Furfural over Ruthenium Catalysts Supported on Porous Aromatic Frameworks","authors":"L. A. Kulikov,&nbsp;D. A. Makeeva,&nbsp;A. M. Dubiniak,&nbsp;M. V. Terenina,&nbsp;Yu. S. Kardasheva,&nbsp;S. V. Egazar’yants,&nbsp;A. F. Bikbaeva,&nbsp;A. L. Maximov,&nbsp;E. A. Karakhanov","doi":"10.1134/S0965544124020191","DOIUrl":null,"url":null,"abstract":"<p>The paper describes an investigation into hydrogenation of furfural over ruthenium catalysts supported on porous aromatic frameworks. The supports were designated as PAF-30-SO<sub>3</sub>H, PAF-30-NH<sub>2</sub>, and PAF-30. The synthesized catalysts were tested in furfural hydrogenation carried out in water and in tetrahydrofuran (with a concentration of 10 wt %) at 90–250°C and a hydrogen pressure of 3 MPa. Although the highest furfural conversion (96%) was achieved in the case of its hydrogenation in water at 250°C over Ru-PAF-30, these conditions did not favor product selectivity. The reaction products mainly consisted of furfuryl alcohol, tetrahydrofurfuryl alcohol, and cyclopentanone. The highest yield of cyclopentanone, 71% (with 80% conversion and 89% selectivity) was observed in furfural hydrogenation over Ru-PAF-30 at 200°C, whereas the conditions optimal for selective hydrogenation of furfural into furfuryl alcohol were found to include either tetrahydrofuran as a solvent or water as a solvent and low temperatures (90–150°C).</p>","PeriodicalId":725,"journal":{"name":"Petroleum Chemistry","volume":"64 4","pages":"471 - 479"},"PeriodicalIF":1.3000,"publicationDate":"2024-06-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Petroleum Chemistry","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1134/S0965544124020191","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CHEMISTRY, ORGANIC","Score":null,"Total":0}
引用次数: 0

Abstract

The paper describes an investigation into hydrogenation of furfural over ruthenium catalysts supported on porous aromatic frameworks. The supports were designated as PAF-30-SO3H, PAF-30-NH2, and PAF-30. The synthesized catalysts were tested in furfural hydrogenation carried out in water and in tetrahydrofuran (with a concentration of 10 wt %) at 90–250°C and a hydrogen pressure of 3 MPa. Although the highest furfural conversion (96%) was achieved in the case of its hydrogenation in water at 250°C over Ru-PAF-30, these conditions did not favor product selectivity. The reaction products mainly consisted of furfuryl alcohol, tetrahydrofurfuryl alcohol, and cyclopentanone. The highest yield of cyclopentanone, 71% (with 80% conversion and 89% selectivity) was observed in furfural hydrogenation over Ru-PAF-30 at 200°C, whereas the conditions optimal for selective hydrogenation of furfural into furfuryl alcohol were found to include either tetrahydrofuran as a solvent or water as a solvent and low temperatures (90–150°C).

Abstract Image

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
多孔芳香族框架支撑的钌催化剂上的糠醛加氢反应
本文介绍了在多孔芳香框架支撑的钌催化剂上进行糠醛加氢的研究。这些支撑物被命名为 PAF-30-SO3H、PAF-30-NH2 和 PAF-30。合成的催化剂在水和四氢呋喃(浓度为 10 wt%)中进行了糠醛加氢试验,试验温度为 90-250°C,氢气压力为 3 兆帕。虽然在 Ru-PAF-30 的作用下于 250°C 水中进行的糠醛氢化反应中,糠醛的转化率最高(96%),但这些条件并不利于产品的选择性。反应产物主要包括糠醇、四氢糠醇和环戊酮。在 Ru-PAF-30 上进行糠醛氢化时,温度为 200°C,环戊酮的产量最高,为 71%(转化率为 80%,选择性为 89%),而糠醛选择性氢化为糠醇的最佳条件是以四氢呋喃为溶剂或以水为溶剂,温度较低(90-150°C)。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Petroleum Chemistry
Petroleum Chemistry 工程技术-工程:化工
CiteScore
2.50
自引率
21.40%
发文量
102
审稿时长
6-12 weeks
期刊介绍: Petroleum Chemistry (Neftekhimiya), founded in 1961, offers original papers on and reviews of theoretical and experimental studies concerned with current problems of petroleum chemistry and processing such as chemical composition of crude oils and natural gas liquids; petroleum refining (cracking, hydrocracking, and catalytic reforming); catalysts for petrochemical processes (hydrogenation, isomerization, oxidation, hydroformylation, etc.); activation and catalytic transformation of hydrocarbons and other components of petroleum, natural gas, and other complex organic mixtures; new petrochemicals including lubricants and additives; environmental problems; and information on scientific meetings relevant to these areas. Petroleum Chemistry publishes articles on these topics from members of the scientific community of the former Soviet Union.
期刊最新文献
Estimating the Petrophysical Properties Cutoff Values for Net Pay Determination: A Case Study of Khasib Formation, Southern Iraq Evaluation of Petrophysical Properties of Mishrif, Rumiala, Ahmadi, and Mauddud Formations in Nasiriya Oil Field—Middle of Iraq Design of Hybrid Porous Materials for Obtaining and Storage of Gas Hydrates Synthesis and Properties of a Low-Viscosity and Acid-Resistant Retarding Agent Fracture Pressure Prediction in Carbonate Reservoir Using Artificial Neural Networks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1