{"title":"Multiphase flow and nozzle wear with CFD-DEM in high-pressure abrasive water jet","authors":"Xiang Zou , Liandong Fu , Lin Wu","doi":"10.1016/j.powtec.2024.120019","DOIUrl":null,"url":null,"abstract":"<div><p>The issue of wear failure in High-Pressure Abrasive Water Jet (HP-AWJ) nozzles is an unavoidable challenge, and studying methods to enhance and predict the effective lifetime of nozzles is worth deep exploration. This paper employs a CFD-DEM coupling numerical approach to investigate wear phenomena inside the HP-AWJ nozzle, aiming to capture the realistic particle wear and erosion failure issues at the focusing tube region, which is a high-wear area of the HP-AWJ nozzle. Furthermore, the study considers realistic particles and nozzle wall constitutive models, incorporating material properties into the physical model, and employs computer-aided design methods to reflect wear failure conditions at different time intervals in the inner wall of the focusing tube at the nozzle. The results demonstrate that the number of realistic particles and initial inlet velocity has no impact on the particle exit kinetic energy. However, the particle-wall restitution coefficient affects the average particle kinetic energy at the outlet in the AWJ nozzle. The equivalent model of the realistic particles reflects the influence of the particle roundness on particle kinetic energy, acceleration, and stress concentration variations in the nozzle. These variations further affect the particle erosion rate on the nozzle wall and the actual wear failure problems on the wall surface. Finally, by combining the proposed erosion and wear model, a representative erosion profile at the AWJ focusing tube location comparable to experimental results is obtained, and the wear depth of the focusing tube changing with time is also studied. The results and methodologies presented in this paper provide valuable guidance for controlling the effective service lifetime of the AWJ nozzle, improving machining efficiency, and extending the lifespan of the AWJ nozzle.</p></div>","PeriodicalId":407,"journal":{"name":"Powder Technology","volume":null,"pages":null},"PeriodicalIF":4.5000,"publicationDate":"2024-06-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Powder Technology","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0032591024006636","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0
Abstract
The issue of wear failure in High-Pressure Abrasive Water Jet (HP-AWJ) nozzles is an unavoidable challenge, and studying methods to enhance and predict the effective lifetime of nozzles is worth deep exploration. This paper employs a CFD-DEM coupling numerical approach to investigate wear phenomena inside the HP-AWJ nozzle, aiming to capture the realistic particle wear and erosion failure issues at the focusing tube region, which is a high-wear area of the HP-AWJ nozzle. Furthermore, the study considers realistic particles and nozzle wall constitutive models, incorporating material properties into the physical model, and employs computer-aided design methods to reflect wear failure conditions at different time intervals in the inner wall of the focusing tube at the nozzle. The results demonstrate that the number of realistic particles and initial inlet velocity has no impact on the particle exit kinetic energy. However, the particle-wall restitution coefficient affects the average particle kinetic energy at the outlet in the AWJ nozzle. The equivalent model of the realistic particles reflects the influence of the particle roundness on particle kinetic energy, acceleration, and stress concentration variations in the nozzle. These variations further affect the particle erosion rate on the nozzle wall and the actual wear failure problems on the wall surface. Finally, by combining the proposed erosion and wear model, a representative erosion profile at the AWJ focusing tube location comparable to experimental results is obtained, and the wear depth of the focusing tube changing with time is also studied. The results and methodologies presented in this paper provide valuable guidance for controlling the effective service lifetime of the AWJ nozzle, improving machining efficiency, and extending the lifespan of the AWJ nozzle.
期刊介绍:
Powder Technology is an International Journal on the Science and Technology of Wet and Dry Particulate Systems. Powder Technology publishes papers on all aspects of the formation of particles and their characterisation and on the study of systems containing particulate solids. No limitation is imposed on the size of the particles, which may range from nanometre scale, as in pigments or aerosols, to that of mined or quarried materials. The following list of topics is not intended to be comprehensive, but rather to indicate typical subjects which fall within the scope of the journal's interests:
Formation and synthesis of particles by precipitation and other methods.
Modification of particles by agglomeration, coating, comminution and attrition.
Characterisation of the size, shape, surface area, pore structure and strength of particles and agglomerates (including the origins and effects of inter particle forces).
Packing, failure, flow and permeability of assemblies of particles.
Particle-particle interactions and suspension rheology.
Handling and processing operations such as slurry flow, fluidization, pneumatic conveying.
Interactions between particles and their environment, including delivery of particulate products to the body.
Applications of particle technology in production of pharmaceuticals, chemicals, foods, pigments, structural, and functional materials and in environmental and energy related matters.
For materials-oriented contributions we are looking for articles revealing the effect of particle/powder characteristics (size, morphology and composition, in that order) on material performance or functionality and, ideally, comparison to any industrial standard.