Predictive study of drying process for limonite pellets using MLP artificial neural network model

IF 4.5 2区 工程技术 Q2 ENGINEERING, CHEMICAL Powder Technology Pub Date : 2024-06-21 DOI:10.1016/j.powtec.2024.120026
Yunpeng Wang, Xiaolei Zhou
{"title":"Predictive study of drying process for limonite pellets using MLP artificial neural network model","authors":"Yunpeng Wang,&nbsp;Xiaolei Zhou","doi":"10.1016/j.powtec.2024.120026","DOIUrl":null,"url":null,"abstract":"<div><p>Due to the decline in high-grade iron ore production, the utilization of low-grade iron ore, such as limonite, has become necessary. Limonite contains a significant amount of bound water, which requires a drying process prior to use. Excessive heat stress caused by the evaporation of bound and free water during the drying of limonite pellets can lead to pellet disintegration and adversely affect gas-solid reactions. In recent years, artificial neural network (ANN) has been developing continuously in the fields of modeling and intelligent control, and has been widely used. Many predecessors used artificial neural network model to study the drying process of natural organic matter, and analyzed the factors affecting the drying rate of organic matter. In this study, we employed big data analysis, specifically Multilayer Perceptron (MLP) artificial neural networks, to analyze the drying process of limonite pellets and successfully established a predictive drying model applicable to limonite pellets. The MLP artificial neural network demonstrated excellent fitting between predicted and experimental values, with a maxi-mum R2 value of 0.999. The artificial neural network for drying developed in this study provides technical guidance for industrial material drying, reduces the workload of manual measurements, and minimizes energy consumption.</p></div>","PeriodicalId":407,"journal":{"name":"Powder Technology","volume":null,"pages":null},"PeriodicalIF":4.5000,"publicationDate":"2024-06-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Powder Technology","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0032591024006703","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

Abstract

Due to the decline in high-grade iron ore production, the utilization of low-grade iron ore, such as limonite, has become necessary. Limonite contains a significant amount of bound water, which requires a drying process prior to use. Excessive heat stress caused by the evaporation of bound and free water during the drying of limonite pellets can lead to pellet disintegration and adversely affect gas-solid reactions. In recent years, artificial neural network (ANN) has been developing continuously in the fields of modeling and intelligent control, and has been widely used. Many predecessors used artificial neural network model to study the drying process of natural organic matter, and analyzed the factors affecting the drying rate of organic matter. In this study, we employed big data analysis, specifically Multilayer Perceptron (MLP) artificial neural networks, to analyze the drying process of limonite pellets and successfully established a predictive drying model applicable to limonite pellets. The MLP artificial neural network demonstrated excellent fitting between predicted and experimental values, with a maxi-mum R2 value of 0.999. The artificial neural network for drying developed in this study provides technical guidance for industrial material drying, reduces the workload of manual measurements, and minimizes energy consumption.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
利用 MLP 人工神经网络模型对褐铁矿球团的干燥过程进行预测研究
由于高品位铁矿石产量下降,利用褐铁矿等低品位铁矿石已成为必要。褐铁矿含有大量结合水,使用前需要进行干燥处理。在褐铁矿球团干燥过程中,结合水和自由水的蒸发所造成的过度热应力会导致球团解体,并对气固反应产生不利影响。近年来,人工神经网络(ANN)在建模和智能控制领域不断发展,并得到了广泛应用。许多前人利用人工神经网络模型研究了天然有机物的干燥过程,分析了影响有机物干燥速率的因素。在本研究中,我们采用了大数据分析,特别是多层感知器(MLP)人工神经网络,来分析褐铁矿颗粒的干燥过程,并成功建立了适用于褐铁矿颗粒的预测性干燥模型。MLP 人工神经网络在预测值和实验值之间表现出极佳的拟合效果,最大 R2 值为 0.999。本研究开发的干燥人工神经网络为工业材料干燥提供了技术指导,减少了人工测量的工作量,并最大限度地降低了能耗。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Powder Technology
Powder Technology 工程技术-工程:化工
CiteScore
9.90
自引率
15.40%
发文量
1047
审稿时长
46 days
期刊介绍: Powder Technology is an International Journal on the Science and Technology of Wet and Dry Particulate Systems. Powder Technology publishes papers on all aspects of the formation of particles and their characterisation and on the study of systems containing particulate solids. No limitation is imposed on the size of the particles, which may range from nanometre scale, as in pigments or aerosols, to that of mined or quarried materials. The following list of topics is not intended to be comprehensive, but rather to indicate typical subjects which fall within the scope of the journal's interests: Formation and synthesis of particles by precipitation and other methods. Modification of particles by agglomeration, coating, comminution and attrition. Characterisation of the size, shape, surface area, pore structure and strength of particles and agglomerates (including the origins and effects of inter particle forces). Packing, failure, flow and permeability of assemblies of particles. Particle-particle interactions and suspension rheology. Handling and processing operations such as slurry flow, fluidization, pneumatic conveying. Interactions between particles and their environment, including delivery of particulate products to the body. Applications of particle technology in production of pharmaceuticals, chemicals, foods, pigments, structural, and functional materials and in environmental and energy related matters. For materials-oriented contributions we are looking for articles revealing the effect of particle/powder characteristics (size, morphology and composition, in that order) on material performance or functionality and, ideally, comparison to any industrial standard.
期刊最新文献
Improving laser powder bed fusion processability of pure Cu through powder functionalization with Ag Thermo-mechanical performance assessment of geopolymer synthesized with steel slag and glass powder at elevated temperatures Numerical simulation of targeted drug delivery to different regions of realistic human lung model under realistic aerosol breathing condition Investigation on mixing performance of the mini-fluidized bed Characterizing interfacial behavior of structurally cemented granular material using a large three-dimensional contact surface testing machine and a mesoscale bond model in DEM
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1