In situ and post-synthesis polymer stabilization of ferromagnetic nanoparticles synthesized by a membrane or conventional reactor

Abstract

Membrane reactors have been proven to be effective in producing nanoparticles with reduced polydispersity indices. Recently, our group has incorporated this technology into the synthesis of ferromagnetic nanoparticles. In the initial phase, we conducted post-synthesis stabilization experiments to assess the performance of various polymeric agents. Polyacrylic acid (PAA) was chosen because of its notable affinity for the functional groups on the nanoparticle surface. Subsequently, in situ stabilization experiments were conducted using a membrane reactor, with variations in PAA addition flow rates ranging from 0.33 to 1.5 mL/min and maturation times in an ultrasonic bath ranging from 0.5 to 2 h. The samples were characterized in terms of their hydrodynamic diameter, polydispersity, and Z-potential. Notably, the smallest particle size was achieved at the intermediate point with a PAA flow rate of 0.66 mL/min. However, the influence of maturation time did not follow a predictable pattern; the most favorable characteristics, based on the analyzed variables, were observed at 1.5 and 2 h.