Assessing color mismatch in single-shade composite resins for enamel replacement

Abstract

Statement of problem

Shade selection is a challenge in restorative dentistry. While single-shade composite resins may simplify this process, whether the color mismatch between this composite resin and the substrate is within acceptable levels to ensure successful outcomes is unclear.

Purpose

The purpose of this in vitro study was to assess the influence of background and surrounding shade, thickness, and proximity to the surrounding on color mismatch when shaded and single-shade composite resins are used in the center of an enamel layer.

Material and methods

Two-layer specimens mimicking dentin (the background) and enamel (the surrounding and center) were prepared. Two shades were used for the background and the surrounding layer (OA1/A1 and OA3/A3). At the Ø3-mm center, 2 single-shade composite resins were placed, Omnichroma (OM) and Admira Fusion x-tra (FU), and also shaded composite resins A1, WE, A3, and C2. For the OA1/A1 background and surrounding, shades A1 and WE served as positive controls, while the A3 and C2 were negative controls. For OA3/A3, these controls were reversed. Two enamel layer thicknesses were evaluated (0.5- and 1.0-mm). Reflectance measurements were made at 0.0, 1.0, 2.0, and 2.5 mm from the center. Color differences were calculated between those at 2.5 mm and at other distances (ΔE_0, ΔE_1, and ΔE₂). Data analysis employed a 4-way repeated measure ANOVA with Bonferroni corrections for the pair-wise comparisons (α=.05).

Results

Background and surrounding shade, central shade, distance, and thickness affected color mismatch (P<.05). For the OA1/A1 specimens, single-shade color mismatch values were found between both the positive and negative controls (P<.05). For the OA3/A3 specimens, the color mismatch did not differ significantly from that of negative controls (P>.05). No difference was found between ΔE₀ and ΔE₁, but each was distinct from ΔE₂. Thickness did not affect the color mismatch of the single-shade composite resins (P<.05).

Conclusions

Single-shade composite resins for enamel replacement showed higher color mismatches compared with positive controls.