Dynamic shear behavior of CFRP-concrete interface: Test and 3D mesoscale numerical simulation

Abstract

The study on dynamic shear behavior of fiber reinforced polymer (FRP)-concrete interface is of great significance for the performance evaluation and design of FRP externally strengthened concrete structures. Firstly, the quasi-static and dynamic single shear test on the interfacial shear behavior between carbon fiber reinforced polymer (CFRP) sheet and concrete substrate was carried out. The corresponding failure modes of CFRP-concrete interface, CFRP strain-time histories, load-displacement curves, and interfacial shear stress-slip relationships under loading rates of 8.33 × 10⁻⁶–10 m·s⁻¹ were obtained. It was indicated that the dynamic interfacial shear behaviors, i.e., interfacial failure mode, debonding load, interfacial shear stress, etc., were sensitive to loading rates. Then, a 3D mesoscale modeling approach of concrete with random shaped, sized, and spatially distributed convex polyhedron aggregates was proposed, in which the volume fraction of aggregates was adjustable within the range of 0–50 % through gravitational drop and size scaling of aggregates. Furthermore, based on the established 3D mesoscale concrete model and the zero-thickness cohesive elements for adhesive layer, numerical simulations for FPR-concrete interfacial shear behavior were conducted and validated by comparing with the present and existing quasit-static and dynamic single shear tests. The experimental phenomenon of the failure location transferring from concrete substrate to adhesive layer at high loading rates was numerically reproduced. Finally, the influences of strain rate enhancing effects of aggregates and mortar on the interfacial failure modes were discussed. It was revealed that the failure location transferring from the concrete substrate to the adhesive layer was significantly affected by the strength enhancement of mortar and aggregates with the loading rate increasing.