Conductive NR/PMMA-RAFT-CNT-rGO composites and their morphological, mechanical, and electrical properties

Abstract

This study reports the synthesis of poly(methyl methacrylate) (PMMA)-carbon nanotube (CNT)-reduced graphene oxide (rGO) emulsions via reversible addition-fragmentation chain-transfer (RAFT)-mediated surfactant-free emulsion polymerization using a hydrophilic chain transfer agent. The rGO was prepared by the modified Hummers method and reduced with L-ascorbic acid. The effects of the CNT:rGO ratios and CNT and rGO contents on the conversion and stability of emulsion were investigated. Increasing the CNT and rGO contents from 1 to 4 wt% decreased the monomer conversion, while all the samples remained as colloidal dispersions. The morphology of PMMA-CNT-rGO composites showed the incorporated arrangement of a linear CNT portion connected with the rGO sheet dependent on the CNT:rGO ratio. Various PMMA-CNT-rGO filled natural rubber (NR) cast films were prepared. The NR/PMMA-CNT-rGO composite film with a 1 wt% filler loading at a CNT:rGO ratio of 1:1 presented a quite high modulus value (3.08 MPa) and sufficient intrinsic electrical conductivity (1.36 S/m) due to its strong filler-matrix interaction. Thus, the PMMA-RAFT-CNT-rGO composites at a very low filler content can be used as an effective reinforcement to enhance the mechanical and electrical properties of NR films with a high compatibility between the fillers and NR matrix.