A Numerical Investigation into the Effect of Thermal Shrinkage and Solidification Shrinkage on the Microstructure and Macrosegregation for Continuous Casting Billet

Tinghe Qiao, Shuang Wang, Rui Guan, Xiaolei Zhu, Xingang Ai, Ji Yang, Shengli Li
{"title":"A Numerical Investigation into the Effect of Thermal Shrinkage and Solidification Shrinkage on the Microstructure and Macrosegregation for Continuous Casting Billet","authors":"Tinghe Qiao, Shuang Wang, Rui Guan, Xiaolei Zhu, Xingang Ai, Ji Yang, Shengli Li","doi":"10.1007/s11663-024-03215-x","DOIUrl":null,"url":null,"abstract":"<p>As a typical metallurgical defect, macrosegregation seriously affects the internal quality of the continuous casting billet, and it cannot be solved by processes such as high-temperature diffusion and rolling. For continuous casting billet, the solidification shrinkage and thermal shrinkage of the microstructure directly affect the macrosegregation defect. In order to reveal the effects of solidification shrinkage and thermal shrinkage on the melt flow, microstructure distribution, and solute segregation, a multiphase solidification model based on the Eulerian–Eulerian approach was established in this work. The growth behaviors of the columnar dendrite trunk and the columnar dendrite tip were fully considered, as well as the nucleation, growth, free migration of equiaxed grains, and the columnar-to-equiaxed transition (CET). Besides, the corresponding relationship between the secondary dendrite arm spacing (SDAS) and the cooling rate has also been taken into account in the model, which makes the net mass transport source term of the mass conservation equations more accurate. The calculation results show that when no any shrinkage behavior is considered in the model, the melt flow velocity in front of the solidification end will gradually decrease until it is the same as the casting speed, and the segregation index at the billet center will gradually increase until it reaches the maximum value at the solidification end. Both thermal shrinkage and solidification shrinkage can generate a negative pressure zone in the billet center, sucking the poor-solute melt located the upstream of continuous casting strand flows towards the solidification end, and mixing with the enriched-solute melt before the solidification end, thereby inhibiting macrosegregation. However, compared with the solidification shrinkage, the effect of thermal shrinkage on reducing the positive segregation index in the billet center is limited.</p>","PeriodicalId":18613,"journal":{"name":"Metallurgical and Materials Transactions B","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2024-07-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Metallurgical and Materials Transactions B","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1007/s11663-024-03215-x","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

As a typical metallurgical defect, macrosegregation seriously affects the internal quality of the continuous casting billet, and it cannot be solved by processes such as high-temperature diffusion and rolling. For continuous casting billet, the solidification shrinkage and thermal shrinkage of the microstructure directly affect the macrosegregation defect. In order to reveal the effects of solidification shrinkage and thermal shrinkage on the melt flow, microstructure distribution, and solute segregation, a multiphase solidification model based on the Eulerian–Eulerian approach was established in this work. The growth behaviors of the columnar dendrite trunk and the columnar dendrite tip were fully considered, as well as the nucleation, growth, free migration of equiaxed grains, and the columnar-to-equiaxed transition (CET). Besides, the corresponding relationship between the secondary dendrite arm spacing (SDAS) and the cooling rate has also been taken into account in the model, which makes the net mass transport source term of the mass conservation equations more accurate. The calculation results show that when no any shrinkage behavior is considered in the model, the melt flow velocity in front of the solidification end will gradually decrease until it is the same as the casting speed, and the segregation index at the billet center will gradually increase until it reaches the maximum value at the solidification end. Both thermal shrinkage and solidification shrinkage can generate a negative pressure zone in the billet center, sucking the poor-solute melt located the upstream of continuous casting strand flows towards the solidification end, and mixing with the enriched-solute melt before the solidification end, thereby inhibiting macrosegregation. However, compared with the solidification shrinkage, the effect of thermal shrinkage on reducing the positive segregation index in the billet center is limited.

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
热收缩和凝固收缩对连铸坯微观结构和宏观偏析影响的数值研究
宏观偏析作为一种典型的冶金缺陷,严重影响连铸坯的内部质量,而且无法通过高温扩散和轧制等工艺来解决。对于连铸坯,微观组织的凝固收缩和热收缩直接影响宏观偏析缺陷。为了揭示凝固收缩和热收缩对熔体流动、微观结构分布和溶质偏析的影响,本文建立了基于欧拉-欧拉方法的多相凝固模型。该模型充分考虑了柱状枝晶主干和柱状枝晶尖端的生长行为,以及等轴晶粒的成核、生长、自由迁移和柱状到等轴的转变(CET)。此外,模型中还考虑了二次枝晶臂间距(SDAS)与冷却速率之间的相应关系,从而使质量守恒方程中的净质量传输源项更加精确。计算结果表明,当模型中不考虑任何收缩行为时,凝固端前方的熔体流动速度将逐渐减小,直至与浇铸速度相同,坯料中心的偏析指数将逐渐增大,直至在凝固端达到最大值。热收缩和凝固收缩都能在坯料中心产生负压区,将位于连铸坯上游的贫溶质熔体吸向凝固端,并在凝固端之前与富溶质熔体混合,从而抑制宏观偏析。然而,与凝固收缩相比,热收缩对降低坯料中心正偏析指数的作用有限。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Synergistic Effect of Graphite and Fly Ash on the Microstructural Evolution and Tribological Characteristics of Fe-Cu-Based Wind Turbine-Sintered Brake Pad Materials Production of Low-Oxygen Ti Powder by Magnesiothermic Reduction of TiO2 in MgCl2–KCl–CeCl3 Molten Salt Coupled CFD-DEM with Flow and Heat Transfer to Investigate the Melting and Motion of Alloy Manufacturing High Strength-Toughness High-Nitrogen Stainless Bearing Steel 30Cr15Mo1VN by Pressurized Duplex Process In Situ Observation of Aggregation of Calcium Aluminate Inclusions at Steel/Ar Interface
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1