Dendrite Fragmentation Behavior and Mechanism during the Solidification of GH4742 Superalloy under Permanent Magnetic Stirring

IF 3.3 3区 材料科学 Q2 MATERIALS SCIENCE, MULTIDISCIPLINARY Metals and Materials International Pub Date : 2024-07-23 DOI:10.1007/s12540-024-01734-5
Jiahui Wang, Lei Wang, Xiu Song, Yang Liu
{"title":"Dendrite Fragmentation Behavior and Mechanism during the Solidification of GH4742 Superalloy under Permanent Magnetic Stirring","authors":"Jiahui Wang, Lei Wang, Xiu Song, Yang Liu","doi":"10.1007/s12540-024-01734-5","DOIUrl":null,"url":null,"abstract":"<p>The effects of permanent magnetic stirring (PMS) on the dendrite fragmentation behavior during the solidification of GH4742 superalloy were in situ investigated and the mechanism was also discussed. The results reveal that the columnar zone size is remarkably reduced with the PMS, because the fragment number at the columnar front increases, resulting in inhibiting the growth of columnar grains. But the columnar zone size shows no significant changing with the increasing PMS rotation speed from 100 to 300 rpm, which is ascribed to the following two aspects. On one hand, the fragment movement is greatly accelerated under the forced melt flow generated by PMS, and the penetration of forced melt flow in the mushy zone has been promoted with the increasing PMS rotation speed. On the other hand, the fragment size gradually increases with the increasing PMS rotation speed, so the fragment number transported to the columnar front by the forced melt flow is almost the similar. Based on the in-situ experiment and theoretical analysis, the dendrite fragmentation during the solidification of GH4742 superalloy is attributed to the remelting of dendrite arm necks because of the local enrichment of Nb, which decreases the equilibrium interface temperature and induces remelting when the superheating exceeds a critical value of 2.8 ℃.</p><h3 data-test=\"abstract-sub-heading\">Graphical Abstract</h3>","PeriodicalId":703,"journal":{"name":"Metals and Materials International","volume":"63 1","pages":""},"PeriodicalIF":3.3000,"publicationDate":"2024-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Metals and Materials International","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s12540-024-01734-5","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

The effects of permanent magnetic stirring (PMS) on the dendrite fragmentation behavior during the solidification of GH4742 superalloy were in situ investigated and the mechanism was also discussed. The results reveal that the columnar zone size is remarkably reduced with the PMS, because the fragment number at the columnar front increases, resulting in inhibiting the growth of columnar grains. But the columnar zone size shows no significant changing with the increasing PMS rotation speed from 100 to 300 rpm, which is ascribed to the following two aspects. On one hand, the fragment movement is greatly accelerated under the forced melt flow generated by PMS, and the penetration of forced melt flow in the mushy zone has been promoted with the increasing PMS rotation speed. On the other hand, the fragment size gradually increases with the increasing PMS rotation speed, so the fragment number transported to the columnar front by the forced melt flow is almost the similar. Based on the in-situ experiment and theoretical analysis, the dendrite fragmentation during the solidification of GH4742 superalloy is attributed to the remelting of dendrite arm necks because of the local enrichment of Nb, which decreases the equilibrium interface temperature and induces remelting when the superheating exceeds a critical value of 2.8 ℃.

Graphical Abstract

Abstract Image

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
永磁搅拌下 GH4742 超合金凝固过程中的枝晶碎裂行为和机理
现场研究了永磁搅拌(PMS)对 GH4742 超合金凝固过程中枝晶破碎行为的影响,并讨论了其机理。结果表明,由于柱状前沿的碎片数量增加,从而抑制了柱状晶粒的生长,柱状区尺寸随 PMS 的增加而明显减小。但柱状区尺寸并没有随着 PMS 转速从 100 转/分到 300 转/分的增加而发生明显变化,这主要归因于以下两个方面。一方面,在 PMS 产生的强制熔流作用下,碎片的运动速度大大加快,并且随着 PMS 转速的增加,强制熔流在粘稠区的穿透力也有所增强。另一方面,碎片尺寸随着 PMS 转速的增加而逐渐增大,因此强制熔体流输送到柱状前沿的碎片数量基本相同。根据现场实验和理论分析,GH4742 超耐热合金凝固过程中的枝晶破碎是由于局部富集 Nb 导致枝晶臂颈重熔,当过热超过临界值 2.8 ℃ 时,平衡界面温度降低并诱发重熔。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Metals and Materials International
Metals and Materials International 工程技术-材料科学:综合
CiteScore
7.10
自引率
8.60%
发文量
197
审稿时长
3.7 months
期刊介绍: Metals and Materials International publishes original papers and occasional critical reviews on all aspects of research and technology in materials engineering: physical metallurgy, materials science, and processing of metals and other materials. Emphasis is placed on those aspects of the science of materials that are concerned with the relationships among the processing, structure and properties (mechanical, chemical, electrical, electrochemical, magnetic and optical) of materials. Aspects of processing include the melting, casting, and fabrication with the thermodynamics, kinetics and modeling.
期刊最新文献
Microstructural and Textural Evolution of a Zr-Sn-Nb-Fe Alloy Tube During Cold Pilger Rolling Effect of Annealing Treatment on the Heterogeneous Microstructure and Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy Microstructure and Mechanical Properties of Al-Cu-Mn Alloy Mechanically Alloyed with 5 wt% Zr After Multi-Directional Forging Fabrication of Cu Particles with Porous Surface and Enhanced Sinter-Bondability between Cu Finishes by Physically In Situ Formation of Cu Nanoparticles Using Them Correction: Research Status and Prospects of Ultrasonic Vibration-Assisted Joining Technology for Difficult-to-Weld High-Strength Alloys
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1