Analysis of Highly Efficient Broadband Push–Pull Class-E Power Amplifier

Abstract

Switching-mode power amplifiers have provided unprecedented opportunities for modern wireless communication technology. However, its single-ended structure suffers from significant harmonic interferences on signal transmission; in some cases, higher return loss caused by the impedance mismatch may damage or even destroy the device directly. Here it shows, analytically and experimentally, a broadband push–pull parallel-circuit (PC) Class-E power amplifier (PA) which can present high efficiency and flatness gain over a wide frequency range. Based on the broadband capability of the proposed structure, a highly-efficient push–pull PC Class-E PA combining single reactance compensation technique and Chebyshev low-pass impedance matching network (MN) is designed and fabricated. Experimental results demonstrated that a drain efficiency of 93.71–94.62% operating from 7.0 to 9.4 MHz, as well as output power (P_out) of 42.1–44.57 dBm and power gain of 14.1–16.57 dB are obtained. The measurement results show good agreements with the simulation results, which may be a potential candidate for electronic article surveillance (EAS) applications operating in the high-frequency band.