Development of Ultra-High-Performance Concrete Using GGBS and Alccofine

Abstract

Abstract: Ultra-high-performance concrete, or UHPC, is a cementitious mixture that is distinguished by its exceptionally high compressive strength—more than 120 MPa as well as its remarkable toughness, tensile ductility, and longevity. Ground Granulated Blast Furnace Slag (GGBS) and Alccofine (AF) are commonly used in the matrix composition to increase the particle system's packing density and subsequently enhance the matrix's strength in order to guarantee that UHPC has the proper strength. To investigate the engineering properties of ternary blended UHPC with GGBS, AF, a comparative study was conducted. In comparison to the control UHPC mix, the ternary blended UHPC mix's mechanical and durability qualities were improved by the percentage variation of AF within specific bounds. In this study, the experimental work included mix proportioning and preparation of ternary blended UHPC specimens and various tests like Compressive Strength, Split Tensile Strength, Flexure Strength and RCPT (Rapid Chloride Penetration Test) were performed in the laboratory. The results show that under normal water curing conditions, the strength qualities of UHPC based on GGBS are considerable, up to a cement replacement level of 40%. In addition, compared to the binary counterpart, the mixture of 20 Percent AF and 40 Percent GGBS showed better mechanical and durability properties.